Bristol · England
Bath chip & crack repair in Stockwood, Bristol
Bath repair for Stockwood, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rusty patches near the plughole
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
What you get with us
- Everything repaired in place
- Honest advice, even when it means no job
- A fixed quote before booking
- One price list for the entire UK
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath repair in Stockwood, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include snagging damage from a refit and deep scratches in acrylic, across cast iron enamel, whirlpool & spa baths and acrylic.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Stockwood (BS14, BS31, BS4)
- County
- Bristol
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Stockwood
Prices start from £95. You will not pay by the hour. The price is based on:
- The size and number of damaged areas
- Doing more than one item at once
- The material and finish
- The colour and finish to match
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Most quotes are done from pictures alone. To help us price it:
- One picture of the whole bath
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Stockwood questions
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What areas do you cover?
All of Bristol, and the rest of the UK. Travel is included in the price.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you cover Stockwood?
We do. Technicians travel to Stockwood from across the region, with no extra charge for travel.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Nearby places to Stockwood
More services for Stockwood
Aftercare tips
Most damage we see is avoidable. These habits help:
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
- Put a towel in the bath if you’re working above it
- Ensure an acrylic bath is firm underfoot
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About Stockwood
Stockwood is about 2 miles west of Keynsham, in Bristol. Whether you’re in the middle of Stockwood or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stockwood is one of 89 places in Bristol we cover. You can also see our page for Birmingham, about 78 miles away.
All of BS14, BS31 and BS4 is within our area, from the main roads to the quietest streets. From Lacey Road, Pynne Road and Coape Road or a nearby road, a technician can come to you. Other places close to Stockwood include Whitchurch (1 mile south-west), Queen Charlton (1 mile south-east), Brislington (1 mile north), Conham (2 miles north) and Knowle (2 miles north-west). We also work in nearby towns such as Bristol (4 miles north-west), Montpelier (4 miles north-west), Easton (3 miles north), Bedminster (3 miles north-west), Cotham (4 miles north-west) and Canon's Marsh (4 miles north-west).
Around Stockwood
We visit homes around Waycroft Academy, Brislington Enterprise College and Hengrove Park, among other places. Also close by are Christ The Servant (within half a mile south-west) and St Bernadette Catholic Secondary School (0.9 miles west). The closest station to Stockwood is Keynsham station, about 2 miles east of the centre. A little further out are The Galleries (3.6 miles north-west) and British Empire and Commonwealth Museum (3 miles north-west). Not far away are Hunstrete Lake and Brandon Hill.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
Getting ready for the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Landlords, agents and businesses in Stockwood
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
