Blaenau Gwent · Wales

Bath Repair for Tafarnaubach homes

Bath repair in and around Tafarnaubach: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips on the rim or sides
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Tafarnaubach

Tafarnaubach: your questions answered

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

What happens if you find more damage?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

What about rust by the waste?

Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair something that’s been repaired before?

Normally, yes. We remove the old repair before doing a new one.

How do I get a price for bath repair in Tafarnaubach?

Prices start from £95. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can you repair a failed DIY repair?

Yes, we do this often. We strip it out, deal with any rust and repair it again.

Bath repair at your home in Tafarnaubach

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and common reasons people get in touch are cracks in an acrylic bath and damage done while the bathroom was being fitted.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Tafarnaubach (NP22)
Area hub
Blaenau Gwent
Guarantee
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

What we can’t put right

We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we cannot reach from underneath
  • A bath worn all over, where resurfacing makes more sense

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

What we are called out for in Tafarnaubach

Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Common reasons people in Tafarnaubach contact us include:

  • A failed DIY repair that’s discoloured or lifting
  • A chipped rim or side
  • Chips under the taps
  • Rusty patches near the plughole

Questions to ask before booking

  • Whether the price covers travel
  • What happens if the damage is worse than the pictures show
  • Who will actually do the work
  • Whether they match the colour on site

Choosing a repair company

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What affects the price in Tafarnaubach

Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:

  • The material
  • What kind of damage it is
  • How much damage there is
  • How easy the damage is to reach

Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Getting a price from pictures

A couple of clear pictures is all it takes. It helps if you send:

  • A clear, close picture of the problem area
  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • A wider photo showing the whole bath

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

What happens on the day

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Send pictures for a quote

Advice

Should you replace it?

Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why book with us

  • Colour-matched on site
  • A fixed quote before you book
  • No extra charge for your area
  • Straight answers about what a repair can do

Take a look at our full price list and bath cost comparison.

Our work in Tafarnaubach

Tafarnaubach is about 1 mile north-west of Tredegar, in Blaenau Gwent. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Tafarnaubach is one of 56 places in Blaenau Gwent where we work. Our jobs stretch from Tafarnaubach to Birmingham (about 75 miles away).

Our technicians cover all of NP22. That includes homes on Merthyr Road and Heads of the Valleys Road. If you are just outside Tafarnaubach, we cover Princetown (1 mile south-west), Waun-deg (1 mile north-east), Tynewydd (1 mile north-east), Nant-y-bwch (1 mile east) and Ashvale (1 mile south-east). Larger places within reach include Ebbw Vale (3 miles east), Abertillery (7 miles south-east), Badminton (3 miles east), Beaufort (3 miles east), Willowtown (3 miles east) and Rassau (3 miles north-east).

Landmarks near Tafarnaubach

Typical jobs here are in homes near Tredegar Comprehensive School, Bryn Bach County Primary School and Nags Head Inn. The nearest railway station is Rhymney station, about 1.9 miles south. Well-known places in the area include Morlais Castle (4.4 miles west) and Tredegar General Hospital (1.6 miles south-east). Open spaces near Tafarnaubach include Rhymney Hill and Glyncoed Lake.

Map of Tafarnaubach © OpenStreetMap contributors

How to look after the repair

Nothing complicated is needed, just a few sensible habits:

  • Get a dripping tap fixed promptly
  • Cover the bath during DIY or decorating
  • Keep abrasive pads and gritty cleaners away from the bath
  • Don’t leave a fresh chip for long

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.