Cumbria · England
Bath Repair in Tallentire
Bath repair in Tallentire without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- A chipped rim or side
- Chips under the taps
How the visit works
Arrival times are agreed in advance. Once we are there, the work takes two to three hours for most chips for most jobs. We leave the room clean.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Let us know about parking or access
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Get a quote
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Tallentire, and we will come back with a fixed quote.
Advice
Bath repair in Tallentire, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you’re dealing with chips under the taps and rust by the waste and overflow, we can typically put it right.
Big or small, you get the same one-year guarantee in Tallentire and across Cumbria.
- Location
- Tallentire (CA13)
- County
- Cumbria
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
To keep it looking its best for years:
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
Honest limits
In fairness, there are a few things a repair will not fix:
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Nearby places to Tallentire
Other services in Tallentire
About Tallentire
Tallentire is about 8 miles north-east of Workington, in Cumbria. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 438 places across Cumbria. Our jobs stretch from Tallentire to Newcastle upon Tyne (about 72 miles away).
We cover every part of the CA13 postcode area and the streets around it. We regularly work on streets such as Fernleigh Close, Rook Farm and Chestnut Close. We also travel to Dovenby (1 mile south-west), Gilcrux (1 mile north), Papcastle (2 miles south), Dearham (3 miles west) and Crosby (3 miles north-west). Larger places within reach include Workington (8 miles south-west), Whitehaven (14 miles south-west), Maryport (4 miles west), Cockermouth (3 miles south), Keswick (12 miles south-east) and Moorclose (8 miles south-west).
Local landmarks in Tallentire
We visit homes around Church of St Bride and Bridekirk Dovenby CofE Primary School. The closest station to Tallentire is Aspatria station, roughly 4.3 miles north-east of the centre. Other landmarks nearby include Cockermouth Castle (2.9 miles south) and The Printing House Museum (2.9 miles south). The countryside around Tallentire includes Clints Crags and Linskeldfield Tarn.
Common problems we fix in Tallentire
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- Chips under the taps
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
Questions to ask before booking
- Aftercare advice
- What happens if the damage is worse than the photos show
- A fixed quote, and whether VAT is included
- Whether the price covers travel
Tallentire questions
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a hole in a bath?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your CA13 postcode.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What affects the price in Tallentire
Repairs from £95. We charge the same across the UK, including Tallentire. The price reflects:
- How many areas need work
- How hard the colour is to match
- The material and finish
- Whether old repairs or coatings need taking off
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
Two or three clear photos are generally enough. It helps if you send:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- What it’s made of, if you know
- A close-up of the damage, in focus
If you’re in Tallentire and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Should you replace it?
People often assume a cracked or chipped bath has to come out. Generally it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Tallentire
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Generally one visit, start to finish
- Same prices wherever you are
Read our pricing or bath cost comparison.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
