Cumbria · England
Bath Repair in Thickholme
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Thickholme and across Cumbria. Free, fixed quotes from your pictures.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Thickholme
- Every repair guaranteed for a year
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
See our full price list and resurfacing vs replacement cost guide.
Bath repair at your home in Thickholme
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on acrylic, whirlpool & spa baths and cast iron enamel, and people most often call us about rust spots around the plughole and chips on the rim or sides.
All of our repairs are guaranteed for twelve months in Thickholme and everywhere else. We return to put right any problem with the work.
- Where
- Thickholme (LA23)
- County
- Cumbria
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Keep a parking space free if you can
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Landlord and trade work in Thickholme
For anyone letting property in or around Thickholme, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Thickholme
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Get in touch if you’ve noticed any of these:
- An old repair that has yellowed or come loose
- Damage beneath the taps
- A chipped rim or side
- Rust by the waste and overflow
Questions to ask before booking
- Whether the price is fixed and includes VAT
- Who turns up on the day
- Whether there are any call-out or travel charges
- How long it needs to cure
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Prices and what affects them
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- What kind of damage it is
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Access to the area
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Quotes from your photos
You can take the pictures on your phone. Ensure they show:
- A picture taken from further back
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Common questions in Thickholme
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can a cracked acrylic bath be fixed?
Generally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you cover Thickholme?
Yes, we do. We send a technician to Thickholme for every job, and the price is the same as everywhere else.
How do I get a price for bath repair in Thickholme?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Towns and villages near Thickholme
Also in Thickholme
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Our work in Thickholme
Thickholme is about 9 miles north-west of Kendal, in Cumbria. Whether you’re in the middle of Thickholme or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Thickholme is one of 438 places in Cumbria we cover. Our nearest city page is Newcastle upon Tyne, about 65 miles away.
Our visits in LA23 are booked in the same way as anywhere else. Close by, we cover Troutbeck Bridge (1 mile south), Troutbeck (1 mile north), Windermere (2 miles south), Bowness-on-Windermere (3 miles south) and Ambleside (3 miles north-west). Larger places within reach include Kendal (9 miles south-east), Grange-over-Sands (15 miles south), Kentrigg (8 miles south-east), Milnthorpe (13 miles south-east), Shap (13 miles north-east) and Staveley (4 miles south-east).
Around Thickholme
We visit homes around Jesus Church and The Lakes School and the streets around them. The nearest railway station is Windermere station, about 1.7 miles south. Other landmarks nearby include Windermere Steamboat Museum (2.2 miles south) and Wray Castle (1.9 miles west). The countryside around Thickholme includes Middlerigg Tarn and Baystones.
About our accreditations · Every repair comes with a one-year guarantee.
