Cumbria · England
Bath chip & crack repair in Torver, Cumbria
Bath repair for Torver, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- A fixed quote before booking
- Straight answers about what a repair can do
- Nothing taken out or refitted
- Colour-matched on site
Read our full price list and resurfacing vs replacement cost guide.
Bath repair in Torver, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. We are frequently asked to fix a cracked acrylic bath and holes from dropped items, across roll-top & freestanding, cast iron enamel and pressed steel enamel.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Torver (LA21)
- Region
- Cumbria
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Torver?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Most people get in touch when they notice one of these:
- A cracked acrylic bath
- Chips along the edge of the bath
- A hole punched through by something heavy
- Chips caused by builders
What your quote should include
- What the guarantee covers, and for how long
- What preparation is included
- Whether the colour is mixed to match
- How the room is protected while they work
Your questions about bath repair in Torver
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Which areas do you work in?
Across the UK. Prices do not change with location.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Places near Torver
Other services in Torver
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes two to three hours for most chips, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Landlords, agents and businesses in Torver
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
How we price bath repair
Repairs from £95. We price every job individually. The main factors are:
- Any earlier repairs that need removing first
- What kind of damage it is
- The material
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- One picture of the entire bath
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
What we can’t put right
It helps to know what we cannot do:
- Cracks in acrylic we can’t reach from underneath
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Our work in Torver
Torver is about 10 miles north of Ulverston, in Cumbria. Customers in Torver get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Torver is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Torver to Liverpool (about 65 miles away).
Here we cover the LA21 postcode area. Local streets include Carr Lane and Walna Scar View, all of which we cover. We also travel to Cat Bank (2 miles north-east), Coniston (2 miles north-east), Low Nibthwaite (4 miles south), Broughton Mills (5 miles south-west) and Hawkshead (5 miles north-east). Larger places within reach include Kendal (15 miles east), Ulverston (10 miles south), Dalton-in-Furness (13 miles south), Windermere (8 miles east), Millom (11 miles south-west) and Grange-over-Sands (13 miles south-east).
Landmarks near Torver
We visit homes around John Ruskin School, Church House Public House and St Luke's Church, among other places. Well-known places in the area include Castle How (4.7 miles north-west). For a walk, there is Long Moss and Walna Scar.
About our accreditations · Every repair comes with a one-year guarantee.
