Staffordshire · England
Bath Repair for Totmonslow homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Totmonslow. Free, fixed quotes from your photos.
- Repairs from £95
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
Bath repair in Totmonslow, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for a hole punched through by something heavy and chips along the edge of the bath, in cast iron enamel, acrylic and roll-top & freestanding.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Where
- Totmonslow (ST10)
- Region
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Towns and villages near Totmonslow
What else we do in Totmonslow
What we cannot put right
We’ll always be straight with you, so here’s what a repair can’t fix:
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Your questions about bath repair in Totmonslow
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Which areas do you work in?
All of Staffordshire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you come to Totmonslow?
Yes. We cover the whole UK and travel to Totmonslow and the rest of Staffordshire. Send pictures and we will quote, or call 0345 017 0787.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Common problems we fix in Totmonslow
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Typical reasons for a call-out include:
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
What to look for in a quote
- What aftercare is recommended
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
Keeping it looking good
Nothing complicated is needed:
- Give the bath a quick rinse after use
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Ask for a price
Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Totmonslow, and we will reply with a fixed price.
Related advice
Repairing versus replacing in Totmonslow
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Totmonslow customers choose us
- Free fixed quotes from pictures
- Technicians who travel to you, UK-wide
- No need to remove anything
- Colour mixed on the day to match
See our full price list or guide to resurfacing and replacement costs.
Covering Totmonslow
Totmonslow is about 2 miles south-west of Cheadle, in Staffordshire. Whether you’re in the middle of Totmonslow or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Totmonslow is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Totmonslow to Birmingham (about 34 miles away).
We work across ST10 and the streets around it. If you are just outside Totmonslow, we cover Draycott in the Moors (1 mile west), Cresswell (1 mile west), Brookhouses (2 miles north), Saverley Green (2 miles west) and Boundary (2 miles north-west). Further out, we also cover Stafford (11 miles south-west), Newcastle-under-Lyme (10 miles north-west), Longton (6 miles north-west), Rugeley (14 miles south), Stone (7 miles south-west) and Leek (10 miles north).
Landmarks near Totmonslow
Around Totmonslow, we work in homes near Cross Keys pub, Moorlands Sixth Form College and Church of St Margaret and the streets around them. For rail, the closest station is Blythe Bridge station, roughly 2.6 miles west of the centre. Other landmarks nearby include Cheadle Hospital (2.1 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
