North Somerset · England
Bath Repair in Winscombe
Our technicians come to Winscombe for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Impact holes in acrylic
Bath repair in Winscombe without replacing anything
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. Our repair technicians work on cast iron enamel, acrylic and pressed steel enamel, and people most frequently call us about cracks in an acrylic bath and rust by the waste and overflow.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Winscombe (BS25)
- Area hub
- North Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Winscombe?
Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why us?
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- Colour mixed on the day to match
Read our pricing and resurfacing vs replacement cost guide.
What else we do in Winscombe
What we’re called out for in Winscombe
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- A chipped rim or side
- Damage beneath the taps
- Scratches you can feel with a fingernail
- A cracked acrylic bath
What to look for in a quote
- What preparation is included
- When it can be used again
- What happens if the damage is worse than the photos show
- How the room is protected while they work
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Do not leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Common questions in Winscombe
How long before I can use the bath?
Normally by the following day, depending on the repair.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you cover Winscombe?
We do. Repair technicians travel to Winscombe from across the region, and the price is the same as everywhere else.
Landlords, agents and businesses in Winscombe
We carry out planned and one-off repairs for housing associations and facilities teams in North Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair can’t put right:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
What we do, step by step
Arrival times are agreed in advance. On site, it takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Advice
Winscombe and nearby
Winscombe is about 6 miles south-east of Weston-super-Mare, in North Somerset. We visit homes and businesses in Winscombe and the surrounding area, so there’s no workshop to go to. We cover all 86 towns and villages across North Somerset.
We cover every part of the BS25 postcode area. Whether you live on Church Road, The Green and Hillyfields Way or anywhere nearby, a technician can come to you. Close by, we cover Sidcot (1 mile east), Star (1 mile north-east), Sandford (1 mile north), Towerhead (1 mile north-west) and Barton (2 miles west). Further out, we also cover Weston-super-Mare (6 miles north-west), Portishead (12 miles north), Clevedon (8 miles north), Nailsea (9 miles north), Milton (6 miles north-west) and Yatton (5 miles north).
Landmarks near Winscombe
We visit homes around Churchill Academy & Sixth Form, Church of St James and The Woodborough pub. For rail, the closest station is Worle station, about 4.5 miles north-west of the centre. Other landmarks nearby include Banwell Museum (1.7 miles north-west) and Banwell Castle (1.2 miles north-west). Green spaces nearby include Wavering Down and Kingswood.
What bath repair costs
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The material and finish
- Whether we combine several jobs
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed quote
You can typically get a fixed quote without us visiting. To make it quick:
- Where you are, by postcode
- One picture of the whole bath
- Whether it’s been repaired or coated before
- The material, if you know it
Send us pictures of the damage and one of the whole item, with your BS25 postcode, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
