Kent · England

Bath chip & crack repair in West End, Kent

Damaged bath in West End? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in West End

Signs you need bath repair in West End

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.

These are the problems we are asked about most:

  • An old repair that has yellowed or come loose
  • Scratches you can feel with a fingernail
  • Rust spots around the plughole
  • Impact holes in acrylic

Comparing quotes

  • Whether a trained technician does the job
  • What the guarantee covers, and for how long
  • How to look after the finish
  • Whether the price covers travel

10 questions to ask before booking

How we handle bath repair in West End

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Whether it’s chips caused by builders and a cracked acrylic bath, we can typically put it right.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Where
West End (CT6)
Area hub
Kent
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Looking after it afterwards

So the finish stays in good condition:

  • A dripping tap stains enamel, so fix it early
  • Stick to mild cleaners and a soft cloth
  • Get any new chip repaired before it rusts
  • Ensure an acrylic bath is firm underfoot

There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

Where we work around West End

West End is about 2 miles south-west of Herne Bay, in Kent. Anywhere in CT6, we carry out the work at your property. West End is one of 922 places in Kent where we work. Our nearest city page is London, about 52 miles away.

Every address in CT6 is covered, from the main roads to the quietest streets. We also cover the places around West End: Radfall (1 mile south-west), Chestfield (1 mile west), Swalecliffe (1 mile north-west), Hampton (2 miles north) and Tankerton (2 miles north-west). We also work in nearby towns such as Canterbury (5 miles south), Margate (13 miles east), Sittingbourne (15 miles west), Ramsgate (14 miles east), Broadstairs (15 miles east) and Faversham (9 miles west).

Near you in West End

In West End, that means homes near Herne Bay High School, Curtis Wood and The Share And Coulter Public House, among other places. Other local landmarks include St Peter (1.1 miles north-east) and Thornden Wood Primary School (0.8 miles north-east). For rail, the closest station is Chestfield & Swalecliffe station, about 1.3 miles north-west of the centre. Other landmarks nearby include Whitstable and Tankerton Hospital (2 miles north-west) and Tankerton Castle (2.7 miles north-west). Green spaces nearby include West Blean and Thornden Woods.

Map of West End © OpenStreetMap contributors

When we would advise against a repair

It helps to know what we can’t do too:

  • A steel bath rusted through
  • A bath worn all over, where resurfacing makes more sense
  • Leaks from the waste or overflow fittings (a plumber’s job)

Send us pictures and we will tell you honestly before booking.

What we work on

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Questions from West End

Is there a call-out fee?

There’s no separate call-out charge. Your fixed price includes everything.

What areas do you cover?

We work UK-wide. Prices do not change with location.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Do you work in West End?

Yes, we do. Technicians travel to West End from across the region, with no extra charge for travel.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

It’s been repaired before. Can you still fix it?

Generally, yes. Tell us what was done before and we will plan for it.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

What happens once I’ve sent photos?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Landlord and trade work in West End

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

If you manage property in West End, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, usually by the following day, the bath is ready to use.

Preparing for the visit

  • Have a window or extractor fan available
  • Point us to the nearest place to park
  • Ensure the area is dry

Get a quote

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say right away if a repair is the right fix.

Get a free quote

Read more

How we price bath repair

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • The type of damage
  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • The material

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • A picture taken from further back
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.