Northumberland · England
Bath chip & crack repair in Whitton, Northumberland
Chip and crack repairs to enamel, acrylic and cast iron baths in Whitton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Chips along the edge of the bath
Whitton questions
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Do you work in Whitton?
Yes. We work across the UK and come to Whitton. Send us photos for a fixed quote, or call 0345 017 0787.
Are there extra charges for Whitton?
Travel is included in the price, with the same prices everywhere we work.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Bath repair in Whitton without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with chips under the taps and cracks in an acrylic bath, we can help, on acrylic, cast iron enamel and roll-top & freestanding alike.
All our work is covered by a one-year guarantee, wherever you are in Northumberland.
- Location
- Whitton (NE65)
- Region
- Northumberland
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Whitton
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Get in touch if you’ve noticed:
- A chipped rim or side
- A cracked acrylic bath
- Rust spots around the plughole
- A hole punched through by something heavy
What to look for in a quote
- How the colour is matched
- Whether cleaning and preparation are in the price
- If travel is included in the price
- How soon you can use it again
Whitton and nearby
Whitton is about 13 miles north-west of Morpeth, in Northumberland. From the centre of Whitton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Whitton is one of 189 places in Northumberland we cover. Our jobs stretch from Whitton to Newcastle upon Tyne (about 24 miles away).
Our visits in NE65 are booked in the same way as anywhere else. Local streets include Hillhead Road and Carterside Road. We also cover the places around Whitton: Rothbury (1 mile north), Newtown (1 mile west), Thropton (2 miles north-west), The Lee (3 miles south-east) and Longframlington (4 miles east). We also work in nearby towns such as Morpeth (13 miles south-east), Alnwick (11 miles north-east), Amble (13 miles east), Bullers Green (12 miles south-east), Ellington (15 miles south-east) and Pegswood (13 miles south-east).
What’s near Whitton
In Whitton, that means homes near Church of All Saints, Rothbury First School and Coquetvale Hotel. Nearby you will also find Cartington Castle at Cartington Farm (2.4 miles north-west) and Rothbury Community Hospital (within half a mile north-west). Not far away are Rothbury Forest.
- Local facilities include Rothbury Urban District (less than half a mile north)
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
More services for Whitton
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Looking after it afterwards
To keep it looking its best:
- Ensure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Do not scrub with anything abrasive
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a few hours. Before leaving, we tell you how long to leave it and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
Should you replace it?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. Our prices are the same across the UK, so there is no premium for Whitton. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Whitton customers choose us
- One-year guarantee on every repair
- A fixed quote before you book
- Work done at your home or business
- Nothing taken out or refitted
Read our prices page or resurfacing vs replacement cost guide.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
What bath repair costs
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- Access to the area
- Unusual colours or finishes
- What kind of damage it is
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Something in shot to show the size
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
