Redcar and Cleveland · England
Bath chip & crack repair in Yearby, Redcar and Cleveland
Bath repair for Yearby, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
Bath repair in Yearby, done in place
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Whether it’s chips under the taps and impact holes in acrylic, we can help.
Big or small, it’s backed by a one-year guarantee in Yearby and across Redcar and Cleveland.
- Location
- Yearby (TS11)
- Area hub
- Redcar and Cleveland
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Yearby, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
- One-year guarantee on every repair
- Typically one visit, start to finish
See our full price list and resurfacing vs replacement cost guide.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Nearby places to Yearby
More services for Yearby
Common questions in Yearby
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Our work in Yearby
Yearby is about 1 mile south of Redcar, in Redcar and Cleveland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Yearby is one of 48 towns and villages in Redcar and Cleveland we cover. Our nearest city page is Newcastle upon Tyne, about 36 miles away.
Our repair technicians cover all of the TS11 postcode area and the streets around it. Streets in the area include Fishponds Road and Yearby Road. Other places close to Yearby include Kirkleatham (1 mile north-west), Wilton (1 mile south-west), New Marske (1 mile east), Dunsdale (1 mile south) and Marske-by-the-Sea (2 miles east). Within a short drive, we also cover Eston (4 miles south-west), Grangetown (3 miles west), Skelton-in-Cleveland (4 miles east), Skelton (4 miles east), Brotton (5 miles east) and South Bank (4 miles west).
What’s near Yearby
Our clients here include homes close to Green Gates Primary School, Church of St Cuthbert and Rye Hills Academy. The closest station to Yearby is Longbeck station, about 1.8 miles east. A little further out are Skelton Castle (3.4 miles east) and Redcar Primary Care Hospital (1.3 miles north). For a walk, there is Coatham Marsh and Eston Nab.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Looking after it afterwards
Looking after the surface is easy:
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
- Rinse the bath after use, especially in hard water areas
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Open a window if you can
- Clear the area around the damage
- Ensure the area is dry
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
What we are called out for in Yearby
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
You may need us if you’ve spotted:
- Holes from dropped items
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
- Deep scratches in acrylic
What your quote should include
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- How long it needs to cure
What we cannot put right
A repair is not right for every job, for example:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
