Redcar and Cleveland · England
Bath chip & crack repair in Wilton, Redcar and Cleveland
Bath repair across Wilton and nearby, generally in one visit.
- Repairs from £95
- Chips under the taps
- Deep scratches in acrylic
What we cannot put right
Some jobs aren’t right for a repair, including:
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Bath repair in Wilton without replacing anything
A typical bath repair is a few hours’ work, and you can generally bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. We are often asked to fix chips under the taps and chips along the edge of the bath, on roll-top & freestanding, pressed steel enamel and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Wilton (TS10)
- Region
- Redcar and Cleveland
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Also in Wilton
The process
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Upload a photo of the damage and one of the whole item, with your TS10 postcode, and we’ll reply with a fixed quote.
Read more
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Wilton. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what helps:
- A coin beside the damage so we can judge size
- Any details about the material
- A clear, close picture of the problem area
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
When to call us in Wilton
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Typical reasons for a call-out include:
- A chipped rim or side
- A kit repair that didn’t last
- Damage beneath the taps
- Scratches you can feel with a fingernail
What to look for in a quote
- How changes to the job are handled
- What protection goes down before work starts
- Whether the price covers travel
- How the colour is matched
Common questions in Wilton
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
How do I get a price for bath repair in Wilton?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What information do you need?
Use the quote form or ring 0345 017 0787.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Repair or replace in Wilton?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We leave the room as we found it
- No extra charge for your area
- We will tell you if it’s not worth repairing
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Landlords, agents and businesses in Wilton
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Where we work around Wilton
Wilton is about 2 miles east of Eston, in Redcar and Cleveland. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 48 towns and villages in Redcar and Cleveland. Our jobs stretch from Wilton to Newcastle upon Tyne (36 miles away).
Postcode districts we cover here: TS10. Close by, we cover Yearby (1 mile north-east), Dunsdale (1 mile south-east), Kirkleatham (2 miles north), New Marske (2 miles east) and Guisborough (3 miles south-east). Further out, we also cover Redcar (3 miles north-east), Skelton-in-Cleveland (4 miles east), Skelton (5 miles east), Brotton (6 miles east), South Bank (3 miles west) and Saltburn-by-the-Sea (5 miles east).
What’s near Wilton
Locally, our jobs take us to homes close to Church of St Cuthbert and Wilton Primary Academy, among other places. Wilton’s nearest station is Longbeck station, roughly 3 miles north-east. Well-known places in the area include Redcar Primary Care Hospital (2.4 miles north-east) and Skelton Castle (4.2 miles east). Open spaces near Wilton include Coatham Marsh and Eston Nab.
About our accreditations · Every repair comes with a one-year guarantee.
