Glasgow · Scotland

Bath & shower resealing (mastic) in Corkerhill, Glasgow

Fixed-price bath resealing in Corkerhill and the surrounding area, normally in one visit.

  • Unsealed corners
  • Silicone coming away from the tiles
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Corkerhill

How we price bath resealing

Each job gets its own fixed quote. These are the things that affect it:

  • Access to the area
  • Unusual colours or finishes
  • How much damage there is
  • Doing more than one item at once

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your pictures

Good photos mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • Whether it’s been repaired or coated before
  • One picture of the whole bath or shower

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price.

Bath resealing at your home in Corkerhill

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, plus curing time. Typical jobs include discoloured, yellow sealant and unsealed corners, on wet rooms, baths and kitchen worktops & sinks.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Corkerhill (G52, G53)
County
Glasgow
Guarantee
A year, on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Our work in Corkerhill

Corkerhill is about 3 miles south-west of Glasgow, in Glasgow. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 183 places across Glasgow, from the larger towns to small villages.

Every address in G52 and G53 is covered, from the main roads to the quietest streets. From Alcaig Road, Langton Road and Hapland Road or anywhere nearby, a technician can come to you. Corkerhill sits on or near the M77, which makes travel easy. We also travel to Nethercraigs (1 mile north-west), Mosspark (1 mile north-east), Halfway (1 mile north), Cowglen (1 mile south) and Pollok (1 mile south-west). Within a short drive, we also cover Glasgow (3 miles north-east), Hillhead (3 miles north-east), Dowanhill (3 miles north-east), Woodlands (3 miles north-east), Woodside (4 miles north-east) and North Kelvinside (4 miles north-east).

Near you in Corkerhill

We visit homes around St. Paul's High School, Craigton Primary School and St James' (Pollok) Parish Church and the streets around them. Corkerhill has its own railway station: Corkerhill station. Well-known places in the area include Silverburn Shopping Centre (0.9 miles south) and Haggs Castle (1.5 miles east).

Map of Corkerhill © OpenStreetMap contributors

Signs you need bath resealing in Corkerhill

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

Get in touch if you’ve noticed any of these:

  • Gaps in the seal
  • Stained silicone
  • Mould you can’t clean out
  • Water getting behind the bath or tray

What to look for in a quote

  • How to care for the finish
  • Whether the price is fixed and includes VAT
  • Whether the colour is mixed to match
  • What happens if they find more damage

Our hiring checklist

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

What happens on the day

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a couple of hours. We leave the room clean.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Tell us about any previous repairs or coatings
  • Let us know which floor the room is on

Get a quote

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Send photos for a quote

Read more

Honest limits

We’ll always be straight with you, so here’s what a repair cannot fix:

  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed
  • Gaps too big for silicone alone

Send us photos and we’ll tell you honestly before you book.

Materials we work on in Corkerhill

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures

Different materials, different repairs

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, so the joint is at its widest.

Corkerhill: your questions answered

Can you repair something that’s been repaired before?

Normally, yes. The old repair comes out first, so let us know about it.

How much does bath resealing cost in Corkerhill?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Can new silicone go over old?

We always remove the old sealant completely. New silicone will not bond to old.

How quickly can you book me in?

We will give you dates with your quote. Tell us if you need it done quickly.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

How long does resealing take?

Most reseals take about two hours. It then needs time to cure.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Keeping it looking good

To keep it looking its best for years:

  • Open a window after bathing
  • Give the seal a regular clean
  • Keep bottles off the joints
  • Run the extractor fan during and after showers

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.