Perth and Kinross · Scotland
Bath & shower resealing (mastic) in Errol, Perth and Kinross
Bath resealing in Errol without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- A messy previous reseal
- Unsealed corners
- Silicone coming away from the tiles
Bath resealing at your home in Errol
Resealing is quick, but it transforms the look. Fresh joints make the entire room look cleaner, and they protect the walls and floor. Whether it’s silicone smeared on tiles and discoloured, yellow sealant, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Errol (PH2)
- County
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes around two hours, and we leave the room as we found it.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Getting ready for the visit
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
To get a price, send a couple of pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Related advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Hidden water damage
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Errol
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
Where we work around Errol
Errol is about 9 miles east of Perth, in Perth and Kinross. From the centre of Errol to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Errol is one of 107 places in Perth and Kinross we cover. Our nearest city page is Edinburgh, about 31 miles away.
Postcode districts we cover here: PH2. Whether you live on Station Road, High Street and North Bank Dykes or anywhere nearby, we can come to you. We also travel to Grange (2 miles north-east), Newburgh (3 miles south), Glencarse (4 miles west), St Madoes (4 miles west) and Lindores (4 miles south). We also work in nearby towns such as Perth (9 miles west), Blairgowrie and Rattray (14 miles north), Kinross (15 miles south-west), Letham (10 miles west), Scone (8 miles west) and Tulloch (10 miles west).
Around Errol
Typical jobs here are in homes near Errol Parish Church and the streets around them. Further afield, we also cover the area around Laing Museum (3.2 miles south) and Ballinbreich Castle (1.9 miles south-east). The countryside around Errol includes Lindores Loch and Norman's Law.
Other services in Errol
Do you need bath resealing in Errol?
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould grows faster.
Typical reasons for a call-out include:
- Silicone smeared on tiles
- Missing sealant behind the taps
- Stained silicone
- Mould you cannot clean out
Before you book anyone
- How changes to the job are handled
- What preparation is included
- How long it needs to cure
- Is the price fixed, and does it include VAT?
What bath resealing costs
Quotes are free and the price is fixed. What we look at:
- The type of damage
- The colour and finish to match
- Any earlier repairs that need removing first
- How many areas need work
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A picture taken from further back
- Any earlier repairs or coatings
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Resealing in Errol: why it matters
Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. We remove the old sealant completely. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- Honest advice, even when it means no job
- Typically one visit, start to finish
Read our pricing.
Errol questions
What areas do you cover?
We work UK-wide, and that includes Errol. Our prices are the same everywhere.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How long before I can shower?
You will get the curing time from us.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Why does my sealant keep splitting?
Something is moving. Persistent splitting can mean the support needs attention.
Why does my sealant keep going mouldy?
Damp is the cause. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Keeping it looking good
Once the work has cured, treat it gently:
- Air the room after use
- Dry the seal after bathing
- Clean the sealant gently and regularly
- Don’t stand toiletries on the seal
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
About our accreditations · Every repair comes with a one-year guarantee.
