Hampshire · England
Bath Resealing for Mead End homes
Bath, shower and sink resealing with new mould-resistant silicone at your home in Mead End, with a one-year guarantee on every repair.
- Mould you can’t clean out
- Leaks at the edges
- Unsealed corners
Bath resealing at your home in Mead End
Resealing is quick, but it transforms the look. Clean, white joints make a bathroom look cared for, and they keep water out. We’re frequently asked to fix leaks at the edges and gaps by the taps, in wet rooms, kitchen worktops & sinks and basins & vanity units.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Mead End (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Mead End
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.
Typical reasons for a call-out include:
- A messy previous reseal
- Gaps in the seal
- Black spots in the silicone
- Water getting behind the bath or tray
What your quote should include
- What happens if the damage is worse than the photos show
- When it can be used again
- How to care for the finish
- Whether they match the colour on site
About Mead End
Mead End is about 4 miles north-west of Lymington, in Hampshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover all 683 towns and villages in Hampshire.
All of SO41 is covered. You’ll find streets such as Marley Mount and Boundway, all of which we cover. We also travel to Tiptoe (1 mile south), Sway (1 mile east), Bashley (1 mile south-west), Ashley (2 miles south) and Wootton (2 miles west). Within a short drive, we also cover Totton (11 miles north-east), Lymington (4 miles south-east), Hythe (11 miles north-east), Ringwood (8 miles north-west), Barton on Sea (3 miles south-west) and Dibden Purlieu (11 miles north-east).
Landmarks near Mead End
Typical jobs here are in homes near The Plough Public House, St Andrew and Tiptoe Primary School. The nearest railway station is Sway station, about 0.9 miles east. A little further out are Lymington New Forest Hospital (3.8 miles east) and Sammy Miller Motorcycle Museum (2.2 miles south-west). For a walk, there’s Milford on Sea LNR.
Landlord and trade work in Mead End
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
More services for Mead End
Common questions in Mead End
Do you work in Mead End?
We do. We send a technician to Mead End for every job, with no extra charge for travel.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Mead End?
We do not add a call-out fee. Your fixed price includes everything.
How long does silicone take to cure?
Normally about a day later. We’ll tell you the exact time.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take around two hours.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- We smooth the bead, remove the tape and leave it to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Prices and what affects them
You will know the full cost before booking. We take into account:
- Doing more than one item at once
- What kind of damage it is
- How much damage there is
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Natural light rather than flash
- Details of any past repairs
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Gaps so wide they need filling or trims before sealing
- Tiles that move, until they’re refixed
- Rotten walls or floors behind the bath
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Run the extractor fan during and after showers
- Store bottles on a shelf
- Wipe the joints dry after use
- Air the room after use
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Different materials, different repairs
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
