Cumbria · England
Bath Resealing in Smardale
Fixed-price bath resealing in Smardale and the surrounding area, generally in one visit and guaranteed for a year.
- Sealant that is split or lifting
- Gaps by the taps
- Stained silicone
Common problems we fix in Smardale
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
You may need us if you’ve spotted any of these:
- A messy previous reseal
- Unsealed corners
- Stained silicone
- Sealant that is split or lifting
Comparing quotes
- How changes to the job are handled
- When it can be used again
- The length of the guarantee and what it covers
- What prep work is covered
Bath resealing in Smardale, done in place
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why so many DIY reseals peel. We regularly repair wet rooms, kitchen worktops & sinks and shower trays & enclosures, and the jobs we see most are black mould in the sealant and discoloured, yellow sealant.
A one-year guarantee comes as standard.
- Where
- Smardale (CA17)
- Region
- Cumbria
- Guarantee
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Smardale
How long will it take?
A bath or shower usually takes a couple of hours. It then needs time to cure.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you seal over the old sealant?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Why does my sealant keep splitting?
Something is moving. Persistent splitting can mean the support needs attention.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take about two hours for a bath, including clearing up.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- The bead is smoothed, the tape removed and the seal left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, for the same reason.
What affects the price in Smardale
You’ll know the full cost before you book. We look at:
- The material
- Where the damage is and how we get to it
- How much damage there is
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- Natural light rather than flash
- A close-up of the damage, in focus
- Your postcode, so we can check dates
Most clients in Smardale get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Also near Smardale
Also in Smardale
Where we work around Smardale
Smardale is about 17 miles north-east of Kendal, in Cumbria. Jobs in Smardale are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Smardale is one of 438 towns and villages in Cumbria we cover. You can also see our page for Newcastle upon Tyne, about 47 miles away.
Every address in CA17 is within our area. Close by, we cover Waitby (1 mile east), Crosby Garrett (1 mile north-west), Soulby (2 miles north), Kirkby Stephen (2 miles east) and Ravenstonedale (3 miles south-west). We also work in nearby towns such as Appleby-in-Westmorland (8 miles north-west), Sedbergh (11 miles south-west), Bongate (8 miles north-west) and Shap (12 miles west).
Around Smardale
We visit homes around St Andrew's Church and Kirkby Stephen Grammar School and the streets around them. Smardale’s nearest station is Kirkby Stephen station, roughly 1.7 miles south-east of the centre. Nearby you’ll also find Hartley settlement (2.9 miles east). The countryside around Smardale includes Birkett Common.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Open a window after bathing
- Store bottles on a shelf
- Replace the seal when mould sets in
- Give the seal a regular clean
Good ventilation is the best protection, and wipe the joints after use to keep mould away.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Is resealing worth it?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Free fixed quotes from pictures
- Work done at your home or business
- We leave the room as we found it
- A year’s guarantee on all work
Read our pricing.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
- Hollow or loose tiles
Send us photos and we’ll tell you honestly before you book.
What we work on
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
About our accreditations · Every repair comes with a one-year guarantee.
