Cumbria · England
Bath Resealing for Tallentire homes
Bath resealing across Tallentire and nearby, done in a single visit in most cases and guaranteed for a year.
- A messy previous reseal
- Mould you cannot clean out
- Sealant that’s split or lifting
Why it’s worth resealing in Tallentire
Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
Take a look at our prices page.
Bath resealing in Tallentire without replacing anything
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. Typical jobs include discoloured, yellow sealant and missing sealant behind the taps, on kitchen worktops & sinks, baths and shower trays & enclosures.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Where
- Tallentire (CA13)
- Region
- Cumbria
- Cover
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a couple of hours. Before leaving, we tell you when it can be used and how to care for it.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Before we arrive
- Clear the area around the damage
- Tell us about parking, stairs or access
- Make sure the area is dry
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Places near Tallentire
What else we do in Tallentire
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Covering Tallentire
Tallentire is about 8 miles north-east of Workington, in Cumbria. Jobs in Tallentire are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover 438 places across Cumbria, from the larger towns to small villages. Our jobs stretch from Tallentire to Newcastle upon Tyne (about 72 miles away).
Jobs in CA13 work the same way as everywhere else we cover. That includes homes on Fernleigh Close, Rook Farm and Chestnut Close and the roads around them. We also travel to Dovenby (1 mile south-west), Gilcrux (1 mile north), Papcastle (2 miles south), Dearham (3 miles west) and Crosby (3 miles north-west). Within a short drive, we also cover Workington (8 miles south-west), Whitehaven (14 miles south-west), Maryport (4 miles west), Cockermouth (3 miles south), Keswick (12 miles south-east) and Moorclose (8 miles south-west).
Local landmarks in Tallentire
Our customers here include homes close to Church of St Bride and Bridekirk Dovenby CofE Primary School. For rail, the closest station is Aspatria station, about 4.3 miles north-east. Well-known places in the area include Cockermouth Castle (2.9 miles south) and The Printing House Museum (2.9 miles south). Open spaces near Tallentire include Clints Crags and Linskeldfield Tarn.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
Trays are sealed with weight on them, for the same reason.
How we price bath resealing
Every quote is fixed and free. What we look at:
- How hard the colour is to match
- Any earlier repairs that need removing first
- How many areas need work
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from photos
Two or three clear photos are generally enough. Try to include:
- Something in shot to show the size
- One sharp close-up of the damage
- The material, if you know it
- One picture of the entire bath or shower
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath or tray that moves, until its support is fixed
- Loose tiles, which need refixing first
- Hidden water damage
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Shower trays & enclosures
Common questions in Tallentire
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Do you cover the entire of Cumbria?
Everywhere in the UK, Tallentire included. Travel is included in the price.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you seal over the old sealant?
We always remove the old sealant completely. Fresh silicone doesn’t stick to old.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What we are called out for in Tallentire
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
You may need us if you’ve spotted:
- Sealant that is split or lifting
- Stained silicone
- Mould you cannot clean out
- Gaps by the taps
Before booking anyone
- Aftercare advice
- Whether the colour is mixed to match
- Who will actually do the work
- How long it needs to cure
Aftercare tips
Simple care helps the repair last. We recommend:
- Reseal at the first sign of lifting
- Run the extractor fan during and after showers
- Keep the joints dry
- Give the seal a regular clean
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
About our accreditations · Every repair comes with a one-year guarantee.
