Monmouthshire · Wales
Bath Resealing for Ton homes
Bath resealing across Ton and nearby, normally in one visit and guaranteed for a year.
- Sealant that is split or lifting
- Water getting behind the bath or tray
- Discoloured, yellow sealant
Bath resealing at your home in Ton
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. We work on shower trays & enclosures, basins & vanity units and wet rooms, and the jobs we see most are gaps by the taps and damp near the bath.
Whatever the size of the job, it’s backed by a one-year guarantee in Ton and across Monmouthshire.
- Where
- Ton (NP15)
- Area hub
- Monmouthshire
- Cover
- One year on every repair
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Ton
Ton is about 5 miles east of Cwmbrân, in Monmouthshire. Whether you’re in the middle of Ton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Ton is one of 115 places in Monmouthshire we cover. You can also see our page for Birmingham, about 71 miles away.
Postcode districts we cover here: NP15. If you’re just outside Ton, we cover Llangybi (1 mile north-east), Llandegveth (2 miles west), Coed-y-paen (2 miles north-west), Llanbadoc (3 miles north) and Ponthir (3 miles south-west). Within a short drive, we also cover Chepstow (11 miles east), Abergavenny (12 miles north), Monmouth (14 miles north-east), Cil-y-coed (9 miles south-east), Pen-y-pound (12 miles north) and Bulwark (11 miles east).
Around Ton
Typical jobs here are in homes near St Cybi's Church and The White Hart pub. The nearest railway station is Cwmbran station, about 4.1 miles west of the centre. Further afield, we also cover the area around Usk Rural Life Museum (2.9 miles north) and Grange University Hospital (3.4 miles west). For a walk, there is Llangibby Castle.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a couple of hours, and you can get on with other things while we are there.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Point us to the nearest place to park
Ask for a price
Most customers in Ton get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Ton questions
How long does a reseal take?
Around two hours for a bath, plus curing time.
What areas do you cover?
Everywhere in the UK, Ton included. There’s no extra charge for travel.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What happens next?
We come back with a fixed quote, plus dates. You’re under no obligation.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Let steam out after showers
- Store bottles on a shelf
- Keep the joints dry
- Run the extractor fan during and after showers
Good ventilation is the best protection, and wipe the joints after use.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
Nearby places to Ton
Also in Ton
What affects the price in Ton
Each job gets its own fixed quote. This is what makes a difference:
- Where the damage is and how we get to it
- Doing more than one item at once
- The material
- How many areas need work
Our prices are the same across the UK, so there is no premium for Ton. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- One picture of the whole bath or shower
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed quote without visiting.
Signs you need bath resealing in Ton
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
Signs it’s time to call us include:
- Gaps by the taps
- Old sealant that looks dirty
- Black spots in the silicone
- Sealant that’s split or lifting
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- When it can be used again
- What the guarantee covers, and for how long
Is resealing worth it?
Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Ton customers choose us
- Work done at your home or business
- A fixed quote before booking
- Nothing taken out or refitted
- Dust sheets down, tidy finish
Take a look at our prices page.
Honest limits
A few problems are outside what a surface repair can do:
- Gaps too big for silicone alone
- Rotten walls or floors behind the bath
- A flexing bath
Send us photos and we will tell you honestly.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Wet rooms
- Baths
About our accreditations · Every repair comes with a one-year guarantee.
