Monmouthshire · Wales
Bath Re-enamelling for Ton homes
We travel to Ton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Ton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a period or roll-top bath worth keeping and a coloured bath you want in white, on Victorian roll-tops, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Ton (NP15)
- Region
- Monmouthshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say right away whether it can be repaired.
Advice
Landlord and trade work in Ton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What else we do in Ton
When to call us in Ton
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Look out for any of the following:
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
- Worn patches where water runs and sits
What your quote should include
- If travel is included in the price
- How the room is protected while they work
- What the guarantee covers, and for how long
- How soon you can use it again
Ton and the surrounding area
Ton is about 5 miles east of Cwmbrân, in Monmouthshire. We travel to clients in Ton and nearby villages, so there’s no workshop to go to. Ton is one of 115 towns and villages in Monmouthshire we cover. Our jobs stretch from Ton to Birmingham (about 71 miles away).
Every address in NP15 is covered. Nearby, we also work in Llangybi (1 mile north-east), Llandegveth (2 miles west), Coed-y-paen (2 miles north-west), Llanbadoc (3 miles north) and Ponthir (3 miles south-west). Within a short drive, we also cover Chepstow (11 miles east), Abergavenny (12 miles north), Monmouth (14 miles north-east), Cil-y-coed (9 miles south-east), Pen-y-pound (12 miles north) and Bulwark (11 miles east).
Landmarks near Ton
We visit homes around St Cybi's Church and The White Hart pub and the streets around them. For rail, the closest station is Cwmbran station, roughly 4.1 miles west of the centre. A little further out are Usk Rural Life Museum (2.9 miles north) and Grange University Hospital (3.4 miles west). For a walk, there is Llangibby Castle.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Questions from Ton
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Repair or replace in Ton?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- Fixed prices from your pictures
- One visit for most repairs
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
Read our full price list or resurfacing vs replacement cost guide.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
