Cumbria · England
Bath Resealing for Winder homes
Our technicians come to Winder for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- An untidy old seal
- Mould you can’t clean out
- Silicone coming away from the tiles
About our bath resealing in Winder
We reseal baths with them filled with water, so the joint opens fully, so the seal doesn’t tear when the bath is first used. Typical jobs include sealant that’s split or lifting and old sealant that looks dirty, in basins & vanity units, kitchen worktops & sinks and wet rooms.
Big or small, you get the same one-year guarantee in Winder and across Cumbria.
- Where
- Winder (CA26)
- County
- Cumbria
- Guarantee
- One year on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a couple of hours, and you can get on with other things while we’re there.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We make sure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Open a window if you can
Getting a price
For a price in Winder, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
About Winder
Winder is about 4 miles east of Whitehaven, in Cumbria. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 438 towns and villages across Cumbria. We work right across the region, from Winder to Newcastle upon Tyne (79 miles away).
Postcode districts we cover here: CA26. Nearby, we also work in Arlecdon (1 mile north), Rowrah (1 mile east), Frizington (1 mile south-west), Kirkland (2 miles east) and Asby (2 miles north-east). Within a short drive, we also cover Workington (7 miles north-west), Whitehaven (4 miles west), Maryport (11 miles north), Cockermouth (9 miles north-east), Keswick (14 miles east) and Moorclose (6 miles north-west).
Near you in Winder
Locally, our jobs take us to homes close to Church of St Michael and Arlecdon Primary School, among other places. Winder’s nearest station is Corkickle station, roughly 4.3 miles west of the centre. Nearby you’ll also find Hayes Castle (3.9 miles north-west) and West Cumberland Hospital (3.8 miles west). The countryside around Winder includes Clints Quarry and Knock Murton.
Places near Winder
Also in Winder
Prices and what affects them
Every quote is fixed and free. What we take into account:
- How much damage there is
- Whether old repairs or coatings need taking off
- The material and finish
- What kind of damage it is
We charge the same wherever you are, with no extra for Winder. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
You can take the pictures on your phone. Just ensure we can see:
- A picture taken from further back
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Send us pictures of the damage and a wider shot of the whole item, with your CA26 postcode, and we’ll come back with a fixed quote.
When to call us in Winder
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Customers normally contact us about:
- Stained silicone
- Black mould in the sealant
- An untidy old seal
- Damp near the bath
What to look for in a quote
- What prep work is covered
- Whether the colour is mixed to match
- How long it needs to cure
- What aftercare is recommended
What your bath or shower is made of matters
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
When we’d advise against a repair
Some jobs are not right for a repair, including:
- Hidden water damage
- Loose tiles, which need refixing first
- A flexing bath
Send us pictures and we will tell you honestly.
Materials we repair
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Basins & vanity units
How to look after the repair
To keep it looking its best:
- Run the extractor fan during and after showers
- Keep bottles off the joints
- Reseal when black spots won’t clean off
- Air the room after use
Avoid scraping the joints, and keep shampoo bottles off the joints.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Why reseal now?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Winder clients choose us
- Work done at your home or business
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
See our prices page.
Questions from Winder
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
How do I get a price for bath resealing in Winder?
Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you come to Winder?
Yes. We cover the whole UK and come to Winder and the rest of Cumbria. Send us photos for a fixed quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
