Cumbria · England

Non-Slip Bath Coating for Allonby homes

Clear non-slip coatings for baths and shower trays at your home in Allonby, with a one-year guarantee on every repair.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Allonby

Prices and what affects them

We price every job individually. What matters most is:

  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • What kind of damage it is
  • What the surface is made of

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Phone photos are fine, there’s no need for anything special. Just make sure we can see:

  • Natural light rather than flash
  • Any earlier repairs or coatings
  • One sharp close-up of the damage
  • Something in shot to show the size

Send us a photo of the damage and one of the whole item, and tell us you are in Allonby, and we will reply with a fixed price.

Non-slip bath coating in Allonby, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Whether it’s safety for older or less mobile people and a bath or tray that is slippery when wet, we can usually put it right.

All our work is covered by a one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Allonby (CA15)
County
Cumbria
Warranty
One year on every repair
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Our work in Allonby

Allonby is about 11 miles north-east of Workington, in Cumbria. Wherever you are in the CA15 postcode area, we come to you. Allonby is one of 438 towns and villages in Cumbria where we work. Our jobs stretch from Allonby to Newcastle upon Tyne (about 73 miles away).

Our visits in CA15 work the same way as everywhere else we cover. We regularly work on streets such as The Square, Main Street and Croft Farm Close and the roads around them. Nearby, we also work in Prospect (3 miles south-east), Crosscanonby (3 miles south), Crosby (3 miles south), Gilcrux (4 miles south-east) and Aspatria (4 miles east). We also work in nearby towns such as Workington (11 miles south-west), Maryport (5 miles south-west), Cockermouth (8 miles south), Moorclose (11 miles south-west), Wigton (11 miles east) and Seaton (9 miles south-west).

Landmarks near Allonby

Locally, our jobs take us to homes close to Christ Church And Sunday School, Allonby Primary School and Ship Hotel, among other places. For rail, the closest station is Aspatria station, about 4 miles east. Well-known places in the area include Hayton Castle (2 miles south-east).

Map of Allonby © OpenStreetMap contributors

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Let us know which floor the room is on
  • Tell us about parking, stairs or access
  • Clear the area around the damage

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You will get a fixed price, not an estimate.

Send pictures for a quote

Advice

Do you need non-slip bath coating in Allonby?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a picture:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • How to look after the finish
  • What happens if they find more damage
  • Whether there are any call-out or travel charges
  • The length of the guarantee and what it covers

How to compare quotes

Honest limits

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why us?

  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job

Read our pricing.

Landlords, agents and businesses in Allonby

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

FAQs for Allonby

Is there any odour?

Expect a mild smell while we are working that clears as it cures.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

What areas do you cover?

Across the UK, so Allonby is covered. Prices do not change with location.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.