Glasgow · Scotland

Non-Slip Bath Coating in Blairdardie

Our repair technicians come to Blairdardie for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Blairdardie

Where we work around Blairdardie

Blairdardie is about 2 miles south-west of Bearsden, in Glasgow. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in 183 places in Glasgow, from the larger towns to small villages.

Jobs in G13, G15 and G61 are booked in the same way as anywhere else. Jobs here include addresses on Mace Road, Fruin Road and Manor Road and the roads around them. Nearby, we also work in Drumchapel (1 mile north-west), Old Drumchapel (1 mile west), Westerton (1 mile north-east), Linnvale (1 mile west) and Drumry (1 mile west). Further out, we also cover Glasgow (5 miles south-east), Hillhead (3 miles south-east), Dowanhill (3 miles south-east), Woodlands (4 miles south-east), Woodside (4 miles south-east) and North Kelvinside (3 miles south-east).

Local landmarks in Blairdardie

Around Blairdardie, we work in homes near Knightswood Secondary School, Jordanhill College and St David's Parish Church and the streets around them. Blairdardie has its own railway station: Drumchapel station. Well-known places in the area include Drumchapel Hospital (less than half a mile north) and Braehead (1.8 miles south). For a walk, there is Castle Hill and Kilmardinny.

Map of Blairdardie © OpenStreetMap contributors

Non-slip bath coating at your home in Blairdardie

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with worn-out textured areas and safety for older or less mobile people, we can help, on resurfaced baths, acrylic baths and enamelled baths alike.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Blairdardie (G13, G15, G61)
Area hub
Glasgow
Guarantee
12 months on all our work
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

What we cannot put right

We will not take on work that will not last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)

How we price non-slip bath coating

We give every job a fixed price from photos. This is what makes a difference:

  • Where the damage is and how we get to it
  • The size and number of damaged areas
  • The type of damage
  • Previous DIY repairs that have to come out

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed price

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

How the visit works

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, including clearing up.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Point us to the nearest place to park
  • Ensure the room can be ventilated
  • Let the surface dry out before the visit

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You will get a fixed quote, not an estimate.

Get a free quote

Related advice

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Work for landlords and builders

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

Housing associations and facilities teams use us for planned and reactive repairs in Glasgow and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Honest advice, even when it means no job
  • Typically one visit, start to finish
  • Dust sheets down, tidy finish
  • Technicians who travel to you, UK-wide

See our full price list.

What we’re called out for in Blairdardie

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Keep an eye out for any of the following:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • How your room will be protected
  • How changes to the job are handled
  • Whether a trained technician does the job
  • How soon you can use it again

How to compare quotes

FAQs for Blairdardie

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What areas do you cover?

All of Glasgow, and the rest of the UK. Travel is included in the price.

Do you work in Blairdardie?

Yes. We cover the entire UK and come to Blairdardie. Send us photos for a fixed quote, or call 0345 017 0787.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

What happens next?

We come back with a fixed quote. You are under no obligation.

How do I book?

Photos of the damage, a picture of the whole bath or shower tray and your postcode. After that, we just agree a date.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.