Cumbria · England

Non-Slip Bath Coating in Roosebeck

Fixed-price non-slip bath coating in Roosebeck and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Roosebeck

How we handle non-slip bath coating in Roosebeck

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you’re dealing with a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can usually put it right.

Big or small, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Roosebeck (LA12, LA13)
County
Cumbria
Warranty
A year, on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

Common questions in Roosebeck

Can you do more than one item on the same visit?

Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.

Do you come to Roosebeck?

Yes. We cover the whole UK and come to Roosebeck. Send us photos for a fixed quote, or call 0345 017 0787.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across Cumbria.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Roosebeck and nearby

Roosebeck is about 4 miles east of Barrow-in-Furness, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Roosebeck is one of 438 towns and villages in Cumbria where we work. Our jobs stretch from Roosebeck to Liverpool (49 miles away).

Postcode districts we cover here: LA12 and LA13. You’ll find streets such as Meadow Lane and Peasholmes Lane, all of which we cover. If you’re just outside Roosebeck, we cover Downfield (1 mile north), Rampside (1 mile south-west), Leece (1 mile north-west), Newbiggin (1 mile north-east) and Dendron (2 miles north). Larger places within reach include Barrow-in-Furness (4 miles west), Ulverston (7 miles north), Hindpool (4 miles west), Salthouse (3 miles west), Dalton-in-Furness (4 miles north) and Risedale (3 miles west).

Local landmarks in Roosebeck

In Roosebeck, that means homes near St Michael's and the streets around them. Roosebeck’s nearest station is Roose station, roughly 2.4 miles north-west. Other landmarks nearby include Portland Walk Shopping Centre (3.6 miles west) and Furness Abbey Museum (3.5 miles north-west). Green spaces nearby include Urswick Tarn and Birkrigg Common.

Map of Roosebeck © OpenStreetMap contributors

What a repair cannot fix

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Roosebeck

  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Before we arrive

  • Point us to the nearest place to park
  • Let the surface dry out before the visit
  • Keep pets and children out of the room while we work

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a free quote

Read more

Common problems we fix in Roosebeck

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

People generally call us after spotting something like this:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • Aftercare advice
  • How your room will be protected
  • Whether the colour is mixed to match
  • What preparation is included

Choosing a repair company

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Landlords, letting agents and housing providers in Roosebeck use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

How we price non-slip bath coating

We don’t charge extra for travel to Roosebeck. The price depends on:

  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • Unusual colours or finishes
  • What the surface is made of

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Quotes from your photos

Most quotes are done from photos alone. To help us price it:

  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • Any details about the material
  • A picture taken from further back

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed quote, not an estimate.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • Repair technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited
  • Everything repaired in place
  • Usually one visit, start to finish

Read our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.