Derbyshire · England

Shower tray repair & resurfacing in Bole Hill, Derbyshire

Local shower tray repair for Bole Hill: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips or cracks by the plughole
  • Movement when you stand on it
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Bole Hill homes

Shower tray repair in Bole Hill, done in place

A cracked or chipped shower tray does not always need replacing. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. Our technicians work on stone resin, enamelled steel and acrylic, and people most often call us about a dull, stained or worn surface and a cracked shower tray.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Where
Bole Hill (S42)
Region
Derbyshire
Cover
One year on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Landlords, agents and businesses in Bole Hill

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

If you manage property in Bole Hill, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Repair or replace: which is better?

A new shower tray typically means removing the screen and tiling, relaying the base and re-tiling. A repair or resurface leaves all of that alone. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Bole Hill clients choose us

  • No extra charge for your area
  • Typically one visit, start to finish
  • One-year guarantee on every repair
  • Straight answers about what a repair can do

See our prices page.

What a repair cannot fix

Before booking, it’s worth knowing the limits too:

  • Damage below the tray that needs a builder
  • Leaking waste fittings
  • Multiple cracks across the tray

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Bole Hill

  • Ceramic
  • Cast iron
  • Enamelled steel
  • Stone resin
  • Acrylic

Looking after it afterwards

Once the work has cured, treat it gently:

  • Keep harsh chemicals off the tray
  • Use the extractor fan
  • Check the seal every few months
  • Get a moving tray checked

Check the silicone around the tray every few months, and replace it when it splits or goes black.

Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can damage the floor below.

What affects the price in Bole Hill

Prices start from £95. We do not charge extra for travel to Bole Hill. The price comes down to:

  • How easy the damage is to reach
  • What kind of damage it is
  • How many areas need work
  • The material

We charge the same wherever you are, so there is no premium for Bole Hill. What changes the price is the job itself: the material, the amount of damage and how many items.

Send photos for a quote

Two or three clear pictures are generally enough. Try to include:

  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • One picture of the entire shower tray

Most customers in Bole Hill get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

What we do, step by step

There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, or most of the day to resurface the whole tray.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

Get a quote

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a free quote

Read more

What your shower tray is made of matters

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. They crack if the base is not fully supported, and chips are filled and matched to the surface.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

Where we work around Bole Hill

Bole Hill is about 4 miles south of Chesterfield, in Derbyshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Bole Hill is one of 532 towns and villages in Derbyshire where we work. Our nearest city page is Manchester, about 37 miles away.

Here we cover the S42 postcode area. We regularly work on streets such as Press Lane and Bolehill Lane and the roads around them. We also cover the places around Bole Hill: Press (1 mile south-east), Northedge (1 mile south-west), Hardwick Wood (1 mile north-east), Alton (1 mile south) and Farhill (1 mile south). Larger places within reach include Chesterfield (4 miles north), Belper (11 miles south), Heanor (13 miles south), Dronfield (8 miles north), Ripley (10 miles south) and Bolsover (8 miles north-east).

What’s near Bole Hill

Typical jobs here are in homes near Tupton Hall School and Deer Park Primary School and the streets around them. For rail, the closest station is Chesterfield station, roughly 4 miles north of the centre. Well-known places in the area include Clay Cross Hospital (2.4 miles south-east) and Clay Cross Urban District (2.3 miles south-east). Green spaces nearby include Beeley Moor.

Map of Bole Hill © OpenStreetMap contributors

Bole Hill questions

Do you cover Bole Hill?

We do. Technicians travel to Bole Hill from across the region, and the price is the same as everywhere else.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Is there a call-out fee?

There’s no separate call-out charge. Your fixed price includes everything.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.

Will the price change on the day?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.