Cumbria · England
Shower Tray Repair for Rampside homes
Fixed-price shower tray repair in Rampside and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chipped corners or rims
- Damage from a refit or building work
Shower tray repair at your home in Rampside
If the entire tray looks tired, we can resurface it, for a clean, uniform finish. If you are dealing with chipped corners or rims and damage from a refit or building work, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Rampside (LA13)
- Region
- Cumbria
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Rampside
Rampside is about 3 miles south-east of Barrow-in-Furness, in Cumbria. Customers in Rampside get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Rampside is one of 438 towns and villages in Cumbria we cover. We work right across the region, from Rampside to Liverpool (48 miles away).
Jobs in LA13 work the same way as everywhere else we cover. Jobs here include addresses on Waver Court, Bow Windows Avenue and Hall Garth. If you are just outside Rampside, we cover Roa Island (1 mile south-west), Roosebeck (1 mile north-east), Downfield (2 miles north), Leece (2 miles north) and Risedale (2 miles north-west). We also work in nearby towns such as Barrow-in-Furness (3 miles north-west), Ulverston (8 miles north), Hindpool (3 miles north-west), Dalton-in-Furness (5 miles north), Vickerstown (4 miles west) and Millom (10 miles north-west).
Around Rampside
In Rampside, that means homes near St Michael's and The Concle Public House, among other places. The nearest railway station is Roose station, roughly 2.3 miles north-west of the centre. A little further out are Portland Walk Shopping Centre (3.1 miles north-west) and Piel Castle (1.7 miles south).
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours for a repair, longer for a full resurface. Before leaving, we tell you how long to leave it and how to look after it.
- We ensure the tray does not flex and look for the cause of any crack.
- Next we clean and prepare the tray.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the whole tray.
- We leave it to cure; the shower is usually usable the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairs by material
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.
Acrylic
Acrylic trays are lighter and slightly flexible, so good support matters. We repair cracks and scratches.
What shower tray repair costs
Prices start from £95. We charge the same across the UK, including Rampside. What changes the price is:
- How hard the colour is to match
- Any earlier repairs that need removing first
- Access to the area
- How many areas need work
Our prices are the same across the UK, so there is no premium for Rampside. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Whether it’s been repaired or coated before
- One picture of the whole shower tray
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Questions from Rampside
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is it OK to use a cracked tray?
We’d stop using it until it’s repaired, because water may be getting underneath.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair something that’s been repaired before?
Usually, yes. The old repair comes out first, so mention it when you send photos.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What does shower tray repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
How long before I can shower?
We will give you the curing time on the day.
Places near Rampside
What else we do in Rampside
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Get a moving tray checked
- Keep harsh chemicals off the tray
- Rinse the tray after each shower
- Check the seal every few months
Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When to call us in Rampside
A tired-looking tray is frequently the result of years of cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.
The most common problems we are called about are:
- Scratches from cleaning or grit
- Chips on the edges
- A dull, stained or worn surface
- A damaged area around the waste
Questions to ask before you book
- What preparation is included
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
Honest limits
A few problems are outside what a surface repair can do:
- Leaking waste fittings
- Water damage to the floor beneath the tray
- A tray broken in more than one place
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Cast iron
- Stone resin
- Ceramic
- Enamelled steel
About our accreditations · Every repair comes with a one-year guarantee.
