Derbyshire · England

Shower tray repair & resurfacing in Stanley, Derbyshire

Shower tray repair for Stanley, without a refit. Get a fixed quote from your photos, then book a visit.

  • Repairs from £95
  • Damage around the waste
  • A tray that flexes
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Stanley

Prices and what affects them

Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • Where the damage is and how we get to it
  • How many items we do on one visit
  • How hard the colour is to match
  • How much damage there is

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from pictures

Phone pictures are fine. Just make sure we can see:

  • The postcode, so we can plan the visit
  • One picture of the entire shower tray
  • One sharp close-up of the damage
  • Natural light rather than flash

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Shower tray repair at your home in Stanley

We repair plenty of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. Whether it’s a damaged area around the waste and a cracked shower tray, we can typically put it right.

All our work comes with a one-year guarantee, wherever you are in Derbyshire.

Where
Stanley (DE7)
Region
Derbyshire
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Repairs by material

Acrylic

Acrylic trays are lighter and slightly flexible, so good support matters. Cracks and scratches can be repaired.

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.

Where we work around Stanley

Stanley is about 3 miles west of Ilkeston, in Derbyshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Stanley is one of 532 places in Derbyshire we cover. We work right across the region, from Stanley to Birmingham (about 40 miles away).

Every address in DE7 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Station Road, Glebe Crescent and Queens Avenue. Nearby, we also work in West Hallam (1 mile north-east), Stanley Common (1 mile north), Dale Abbey (2 miles south-east), Mapperley (2 miles north-east) and Kirk Hallam (2 miles east). Larger places within reach include Swadlincote (15 miles south-west), Ilkeston (3 miles east), Long Eaton (6 miles south-east), Belper (6 miles north-west), Heanor (4 miles north) and Ripley (6 miles north).

Around Stanley

Locally, our jobs take us to homes close to St Andrew's CofE Primary School, Church of St Andrew and Saint John Houghton Catholic Voluntary Academy. For rail, the closest station is Spondon station, roughly 3.6 miles south-west of the centre. A little further out are Mr Vacuum Cleaner Museum (3.8 miles north) and Horston Castle (3.2 miles north-west).

Map of Stanley © OpenStreetMap contributors

Repairing versus replacing in Stanley

The tray is generally the last thing fitted and the first thing tiled up to, so replacing one disturbs a lot around it. Repairing it avoids that disruption. Prices start from £95. We charge the same wherever you are, so there’s no premium for Stanley. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Stanley

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • Free fixed quotes from pictures
  • Colour mixed on the day to match

Read our prices page.

When to call us in Stanley

Dull and stained trays are generally down to cleaning: abrasive pads, strong chemicals and limescale strip the surface finish.

Contact us if you’ve noticed any of these:

  • A damaged area around the waste
  • Movement when you stand on it
  • Scratches from cleaning or grit
  • Edge chips from dropped bottles

What your quote should include

  • Whether there are any call-out or travel charges
  • How the room is protected while they work
  • How changes to the job are handled
  • How soon you can use it again

Our hiring checklist

Your questions about shower tray repair in Stanley

Can you make an old tray look new?

Yes. A full resurface makes a tired tray look fresh.

What happens if you find more damage?

Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.

Do you work in Stanley?

We do. Technicians travel to Stanley from across the region, and the price is the same as everywhere else.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Is the work guaranteed?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

What happens once I’ve sent pictures?

You get a fixed quote and available dates. If we need another angle, we will ask.

What happens on the day

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a few hours, or most of the day to resurface the whole tray for most jobs. We leave the room clean and you’ll know when it can be used.

  1. First we check the tray is solid and work out why any crack happened.
  2. Next we clean and prepare the tray.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. We colour-match the repair, or spray a new finish across the entire tray.
  5. We leave it to cure; the shower is usually usable the day after.

How to prepare

  • Mention any parking restrictions or tricky access
  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift

How to get a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Send pictures for a quote

Related advice

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • Rotten or damaged flooring underneath
  • Leaks from the waste or pipework (a plumber’s job)
  • A tray that moves underfoot

Send us photos and we will tell you honestly.

What we work on

  • Cast iron
  • Acrylic
  • Enamelled steel
  • Stone resin
  • Ceramic

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.