Perth and Kinross · Scotland
Bath Re-enamelling for Abernethy homes
We travel to Abernethy for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Abernethy
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and common reasons people get in touch are a bath in a colour that no longer suits and a peeling or bubbling previous coating.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Abernethy (PH2)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Abernethy
Abernethy is about 7 miles south-east of Perth, in Perth and Kinross. Jobs in Abernethy are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Abernethy is one of 107 towns and villages in Perth and Kinross we cover. Our nearest city page is Edinburgh, about 27 miles away.
All of PH2 is within our area. Streets in the area include Clow Square, Main Street and Station Road, all of which we cover. Close by, we cover Aberargie (2 miles west), St Madoes (3 miles north), Newburgh (3 miles north-east), Glencarse (3 miles north) and Bridge of Earn (4 miles west). We also work in nearby towns such as Perth (7 miles north-west), Auchterarder (15 miles west), Kinross (10 miles south-west), Letham (8 miles north-west), Scone (7 miles north-west) and Tulloch (8 miles north-west).
Around Abernethy
Our clients here include homes close to Kirk Of St Bride. Well-known places in the area include Pitfour Castle (2.8 miles north) and Bridge of Earn Hospital (3.1 miles west). The countryside around Abernethy includes Pitcairlie Hill and Lindores Loch.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take most of the day.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Questions from Abernethy
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you work in Abernethy?
We do. Technicians travel to Abernethy from across the region, and the price is the same as everywhere else.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Are there extra charges for Abernethy?
Travel is included in the price, and we charge the same wherever you are.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
What you get with us
- Nothing taken out or refitted
- Every repair guaranteed for a year
- We leave the room as we found it
- Colour-matched on site
Take a look at our prices page and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Abernethy?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Several chips and rust patches
- A bath in a colour that no longer suits
Comparing quotes
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Who will actually do the work
Honest limits
Before you book, it’s worth knowing the limits too:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What affects the price in Abernethy
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- Whether we combine several jobs
- The type of damage
- How hard the colour is to match
- How much damage there is
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
You can take the pictures on your phone. Just make sure we can see:
- Natural light rather than flash
- One picture of the whole bath
- The postcode, so we can plan the visit
- Something in shot to show the size
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Also in Abernethy
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How to look after the repair
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Respect the curing time we give you
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
