Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Glencarse, Perth and Kinross
Fixed-price bath re-enamelling in Glencarse and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Wear marks under the taps
Bath re-enamelling in Glencarse, done in place
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Whether it’s brown or grey marks that don’t clean off and several chips and rust patches, we can help, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Glencarse (PH2)
- Region
- Perth and Kinross
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Looking after the surface is easy:
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Glencarse: your questions answered
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
How much does bath re-enamelling cost in Glencarse?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and we’ll quote them together.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Glencarse. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Glencarse customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Colour mixed on the day to match
- Work done at your home or business
- A year’s guarantee on all work
Read our full price list and resurfacing vs replacement cost guide.
What affects the price in Glencarse
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The colour and finish to match
- The type of damage
- The material and finish
- Where the damage is and how we get to it
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
You can normally get a fixed quote without us visiting. To help us price it:
- The material, if you know it
- One picture of the whole bath
- Where you are, by postcode
- One sharp close-up of the damage
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Landlord and trade work in Glencarse
We carry out planned and one-off repairs for housing associations and facilities teams in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When to call us in Glencarse
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
What to look for in a quote
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
When a repair is not the answer
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Covering Glencarse
Glencarse is about 6 miles east of Perth, in Perth and Kinross. We travel to clients in Glencarse, so you don’t need to take anything anywhere. We work in all 107 towns and villages across Perth and Kinross. Our jobs stretch from Glencarse to Edinburgh (about 30 miles away).
Our visits in PH2 work the same way as everywhere else we cover. Whether you live on Madoch Road, Pitfour and Gowrie Way or a nearby road, we can come to you. If you are just outside Glencarse, we cover St Madoes (1 mile south), Kinfauns (2 miles west), Newburgh (3 miles south-east), Abernethy (3 miles south) and Errol (4 miles east). We also work in nearby towns such as Perth (6 miles west), Blairgowrie and Rattray (15 miles north), Kinross (13 miles south), Letham (7 miles west), Scone (5 miles north-west) and Tulloch (7 miles west).
Landmarks near Glencarse
We visit homes around All Saints Church and the streets around them. Well-known places in the area include Bridge of Earn Hospital (4.1 miles south-west) and Pitfour Castle (0.5 miles south-east). For a walk, there is Pitcairlie Hill.
The process
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
Ask for a price
If you are in Glencarse and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
What else we do in Glencarse
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
