Stockton-on-Tees · England
Bath re-enamelling & resurfacing in Aislaby, Stockton-on-Tees
Our technicians come to Aislaby for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
About Aislaby
Aislaby is about 1 mile north-west of Yarm, in Stockton-on-Tees. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Aislaby is one of 31 places in Stockton-on-Tees we cover. We work right across the region, from Aislaby to Newcastle upon Tyne (about 35 miles away).
Postcode districts we cover here: TS16. If you are just outside Aislaby, we cover Egglescliffe (1 mile north-east), Eaglescliffe (1 mile north-east), Levendale (2 miles east), Low Leven (3 miles east) and Ingleby Barwick (3 miles east). Further out, we also cover Stockton-on-Tees (5 miles north), Billingham (8 miles north-east), Thornaby-on-Tees (4 miles north-east), Elm Tree Farm (5 miles north), Fairfield (4 miles north) and Wynyard (9 miles north).
What’s near Aislaby
Typical jobs here are in homes near Yarm School, Layfield Primary School and St Mary Magdalene. Nearby too are Egglescliffe School (1 mile north-east) and The Cross Keys Public House (0.9 miles east). The nearest railway station is Yarm station, roughly 1.3 miles south-east. Nearby you’ll also find University Hospital of North Tees (5.5 miles north) and Yarm Castle (0.9 miles east).
Bath re-enamelling in Aislaby, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for wear marks under the taps and several chips and rust patches, on Victorian roll-tops, acrylic baths and cast iron baths.
You get a one-year guarantee, the same in Aislaby as everywhere else we work.
- Area
- Aislaby (TS16)
- County
- Stockton-on-Tees
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Aislaby: your questions answered
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Stockton-on-Tees.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Do you cover the entire of Stockton-on-Tees?
Across the UK, so Aislaby is covered. Our prices are the same everywhere.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
For landlords and businesses
Landlords, letting agents and housing providers in Aislaby use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Stockton-on-Tees and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
How the visit works
Arrival times are agreed in advance. On site, it takes the best part of a day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
When to call us in Aislaby
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- A dull, rough surface that will not come clean
- Several chips and rust patches
- An old resurfacing that’s failing
- Wear marks under the taps
What to look for in a quote
- What prep work is covered
- Who will actually do the work
- What aftercare is recommended
- Whether they match the colour on site
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Places near Aislaby
More services for Aislaby
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Most jobs done in one visit
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
See our full price list or bath cost comparison.
What affects the price in Aislaby
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- The material
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Details of any past repairs
- Your postcode, so we can check dates
- Any details about the material
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Aftercare tips
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
