Stockton-on-Tees · England
Bath Re-enamelling for Low Leven homes
Bath re-enamelling for Low Leven, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Thin, worn enamel in places
Looking after it afterwards
To keep it looking its best for years:
- Respect the curing time we give you
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Low Leven without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with chips and rust in more than one place and a dull, rough surface that won’t come clean, we can typically put it right, on Victorian roll-tops, acrylic baths and cast iron baths alike.
All our work is covered by a one-year guarantee, wherever you are in Stockton-on-Tees.
- Location
- Low Leven (TS17, TS15)
- County
- Stockton-on-Tees
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Also near Low Leven
What else we do in Low Leven
Signs you need bath re-enamelling in Low Leven
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The things customers normally mention when they call are:
- An old resurfacing that is failing
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
What your quote should include
- The length of the guarantee and what it covers
- If travel is included in the price
- When it can be used again
- How the room is protected while they work
Where we work around Low Leven
Low Leven is about 1 mile south of Ingleby Barwick, in Stockton-on-Tees. From the centre of Low Leven to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 31 towns and villages across Stockton-on-Tees, from the larger towns to small villages. Our jobs stretch from Low Leven to Newcastle upon Tyne (about 36 miles away).
We work across the TS17 and TS15 postcode area and the streets around it. That includes homes on Bridgewater, Martinhoe Close and Watersmeet Close. Low Leven is on the A1044, which makes it straightforward to reach. If you’re just outside Low Leven, we cover High Leven (1 mile north-east), Levendale (1 mile west), Ingleby Barwick (1 mile north), Eaglescliffe (2 miles north-west) and Egglescliffe (2 miles north-west). Within a short drive, we also cover Stockton-on-Tees (5 miles north), Billingham (8 miles north), Thornaby-on-Tees (3 miles north), Elm Tree Farm (5 miles north), Fairfield (5 miles north) and Wynyard (10 miles north).
Around Low Leven
We visit homes around Ingleby Mill Primary School, 1 Bridgewater pub and St. Francis of Assisi Church of England, among other places. The closest station to Low Leven is Yarm station, about 1.6 miles south-west of the centre. Well-known places in the area include Carter Bequest Primary Care Hospital (4.4 miles north-east) and Yarm Castle (1.6 miles west).
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- The size and number of damaged areas
- Access to the area
- The type of damage
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
You can take the photos on your phone. Just make sure we can see:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- One picture of the entire bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Common questions in Low Leven
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Prices start from £350. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Low Leven clients choose us
- Colour-matched on site
- Straight answers about what a repair can do
- We leave the room as we found it
- Typically one visit, start to finish
Read our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
