Kent · England
Bath Re-enamelling for Aylesham homes
We travel to Aylesham for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Aylesham
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our repair technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are worn patches where water runs and sits and an original cast iron bath that needs restoring.
All our work comes with a one-year guarantee, wherever you are in Kent.
- Where
- Aylesham (CT3)
- County
- Kent
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Also near Aylesham
What else we do in Aylesham
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Questions from Aylesham
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Which areas do you work in?
We cover the entire UK, including Aylesham and the rest of Kent. Send your postcode with your pictures and we’ll offer you dates.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Getting a price
If you’re in Aylesham and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Honest limits
We will not take on work that will not last, so these are the limits:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Do not leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Signs you need bath re-enamelling in Aylesham
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- A bath in a colour that no longer suits
What to look for in a quote
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- Who turns up on the day
- What the guarantee covers, and for how long
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How many items we do on one visit
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- What the surface is made of
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Before you send pictures, these tips help us give you a firm price:
- One picture of the whole bath
- Something in shot to show the size
- One sharp close-up of the damage
- Natural light rather than flash
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
About Aylesham
Aylesham is about 6 miles south-east of Canterbury, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from Aylesham to London (59 miles away).
Every address in CT3 is covered, from the main roads to the quietest streets. Jobs here include addresses on Market Place, Mexborough Square and Derwent Way. We also travel to Bloodden (1 mile north), Adisham (1 mile north), Womenswold (1 mile south-west), Woolage Green (2 miles south) and Out Elmstead (2 miles south-west). Within a short drive, we also cover Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (10 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
Around Aylesham
Around Aylesham, we work in homes near St Peter and Aylesham Primary School, among other places. Aylesham has its own railway station: Aylesham station. Other landmarks nearby include St Martins Hospital (5.2 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
