Kent · England
Bath Re-enamelling in Womenswold
Damaged bath in Womenswold? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- An original cast iron bath that needs restoring
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling in Womenswold, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We are often asked to fix a bath in a colour that no longer suits and stains that won’t shift, across pressed steel baths, basins & shower trays and acrylic baths.
Every repair comes with a one-year guarantee.
- Where
- Womenswold (CT4)
- Region
- Kent
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which usually takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Covering Womenswold
Womenswold is about 7 miles south-east of Canterbury, in Kent. Customers in Womenswold get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Our technicians cover 922 places across Kent. Our nearest city page is London, about 59 miles away.
All of CT4 is covered. Nearby, we also work in Woolage Green (1 mile south-east), Gravel Castle (1 mile south-west), Barham (1 mile west), Aylesham (1 mile north-east) and Out Elmstead (1 mile west). Within a short drive, we also cover Ashford (15 miles west), Canterbury (7 miles north-west), Margate (14 miles north-east), Dover (7 miles south-east), Folkestone (9 miles south) and Ramsgate (13 miles north-east).
Near you in Womenswold
We visit homes around Church of St Margaret, among other places. For rail, the closest station is Snowdown station, about 1.1 miles east of the centre. Other landmarks nearby include St Martins Hospital (5.8 miles north-west).
Nearby places to Womenswold
Also in Womenswold
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material
- Doing more than one item at once
- What kind of damage it is
- How many areas need work
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Details of any past repairs
- A wider photo showing the entire bath
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
FAQs for Womenswold
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you work in Womenswold?
Yes. We cover the whole UK and travel to Womenswold and the rest of Kent. Send us photos for a fixed quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Signs you need bath re-enamelling in Womenswold
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people contact us after spotting one of these:
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Before booking anyone
- Whether cleaning and preparation are in the price
- Who will actually do the work
- When it can be used again
- Aftercare advice
Landlord and trade work in Womenswold
Landlords, letting agents and housing providers in Womenswold use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
