Buckinghamshire · England
Bath Re-enamelling in Baker's Wood
Fixed-price bath re-enamelling in Baker's Wood and the surrounding area, typically in one visit.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
Bath re-enamelling in Baker's Wood, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our technicians work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people get in touch are worn patches where water runs and sits and chips and rust in more than one place.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Baker's Wood (UB9)
- County
- Buckinghamshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Ensure the area is dry
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Common problems we fix in Baker's Wood
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Most people contact us when they notice something like this:
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
What to look for in a quote
- Whether they match the colour on site
- What prep work is covered
- What happens if they find more damage
- How soon you can use it again
Questions from Baker's Wood
Do you cover Baker's Wood?
Yes, we do. We send a technician to Baker's Wood for every job, with no extra charge for travel.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- Unusual colours or finishes
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Quotes from your photos
You can usually get a fixed quote without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A picture taken from further back
- The material, if you know it
Send us a photo of the damage and one of the entire item, with your UB9 postcode, and we will come back with a fixed quote.
Towns and villages near Baker's Wood
What else we do in Baker's Wood
Keeping it looking good
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
- Fix dripping taps quickly
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- Nothing taken out or refitted
- Most jobs done in one visit
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
See our pricing and resurfacing vs replacement cost guide.
When a repair is not the answer
In fairness, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Baker's Wood and the surrounding area
Baker's Wood is about 4 miles north-west of Hillingdon, in Buckinghamshire. Our repair technicians come to homes and businesses in Baker's Wood and nearby villages, so there’s no workshop to go to. Baker's Wood is one of 263 towns and villages in Buckinghamshire we cover. Our jobs stretch from Baker's Wood to London (19 miles away).
Our visits in UB9 are booked in the same way as anywhere else. From Bakers Wood, Redhill and Broken Gate Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Higher Denham (1 mile north), Tatling End (1 mile west), Rush Green (1 mile south), Gerrards Cross (2 miles west) and Fulmer (2 miles south-west). Larger places within reach include High Wycombe (11 miles west), Chesham (10 miles north-west), Marlow (11 miles west), Amersham (8 miles north-west), Beaconsfield (6 miles north-west) and Chalfont St Peter (3 miles north-west).
Near you in Baker's Wood
In Baker's Wood, that means homes near Church of St Mary, Toby Carvery pub and Denham Village School, among other places. Baker's Wood’s nearest station is Denham Golf Club station, roughly 0.5 miles north of the centre. Nearby you’ll also find The Pavilions (2.4 miles south-east) and Hillingdon Museum and Archives Services (2.6 miles south-east). Not far away are Horse Shoe Bay and Kingcup Meadows and Oldhouse Wood.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
