Hampshire · England
Bath re-enamelling & resurfacing in Beech, Hampshire
Bath re-enamelling in and around Beech: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
FAQs for Beech
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Do you come to Beech?
We do. Repair technicians travel to Beech from across the region, and the price is the same as everywhere else.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Bath re-enamelling at your home in Beech
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on cast iron baths, acrylic baths and pressed steel baths, and people most frequently call us about a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Beech (GU34)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Beech
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- A bath in a colour that no longer suits
- Stains that will not shift
Questions to ask before booking
- Whether they match the colour on site
- Whether a trained technician does the job
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
Beech and nearby
Beech is about 2 miles west of Alton, in Hampshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Beech is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 47 miles away.
Jobs in GU34 are booked in the same way as anywhere else. Whether you live on Wellhouse Road, Medstead Road and King's Hill or a nearby road, a technician can come to you. We also travel to Thedden (1 mile north-west), Wivelrod (1 mile west), Bentworth (2 miles north-west), Holt End (2 miles west) and New Copse (2 miles west). Larger places within reach include Basingstoke (9 miles north-west), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (13 miles north-east) and Petersfield (10 miles south).
Landmarks near Beech
Our clients here include homes close to St Peter's and Amery Hill School, among other places. The nearest railway station is Alton station, roughly 2.2 miles east. Nearby you’ll also find Barton Castle (4.3 miles west) and Alton Community Hospital (1.2 miles east). Open spaces near Beech include King's Hill.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- Colour-matched on site
- Honest advice, even when it means no job
- Rooms protected and left tidy
- Same prices wherever you are
Take a look at our full price list and resurfacing vs replacement cost guide.
Also in Beech
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
- Point us to the nearest place to park
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
How to look after the repair
To keep it looking its best for years:
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- What kind of damage it is
- How hard the colour is to match
- How many items we do on one visit
- The size and number of damaged areas
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Something in shot to show the size
- One sharp close-up of the damage
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
