Perth and Kinross · Scotland
Bath Re-enamelling in Birnam
Full bath re-enamelling and resurfacing at your home in Birnam, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that’s seen better days
- Several chips and rust patches
Bath re-enamelling in Birnam, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. There is no removal, plumbing or tiling involved. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are several chips and rust patches and stains that won’t shift.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Birnam (PH8)
- County
- Perth and Kinross
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
Also near Birnam
More services for Birnam
Birnam: your questions answered
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Our work in Birnam
Birnam is about 9 miles west of Blairgowrie and Rattray, in Perth and Kinross. We visit homes and businesses in Birnam, so nothing has to leave your home. Birnam is one of 107 towns and villages in Perth and Kinross where we work. You can also see our page for Edinburgh, about 45 miles away.
We work across PH8. Whether you live on Station Road, Perth Road and Gladstone Terrace or a nearby road, a technician can come to you. Nearby, we also work in Little Dunkeld (1 mile north-west), Dunkeld (1 mile north-west), Inchmagrannachan (3 miles north-west), Middleton (3 miles east) and Caputh (3 miles east). Within a short drive, we also cover Perth (12 miles south-east), Blairgowrie and Rattray (9 miles east), Letham (11 miles south), Scone (11 miles south-east), Pitlochry (12 miles north-west) and Tulloch (11 miles south).
Landmarks near Birnam
We visit homes around Atholl Arms Hotel, Birnam and The Hermitage and the streets around them. There is a railway station in Birnam itself: Dunkeld & Birnam station. Further afield, we also cover the area around Murthly Castle (2.6 miles south-east) and Scottish Horse Regimental Museum (0.8 miles north-west). Green spaces nearby include Birnam Hill and Loch of the Lowes.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Steel that has corroded right through
Send us pictures and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When to call us in Birnam
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Common reasons people in Birnam contact us are:
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
What your quote should include
- How the colour is matched
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Birnam. What changes the price is:
- The size and number of damaged areas
- How hard the colour is to match
- Any earlier repairs that need removing first
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Birnam. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- One sharp close-up of the damage
- One picture of the whole bath
- Any details about the material
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Birnam use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
