Lancashire · England
Bath re-enamelling & resurfacing in Brookfield, Lancashire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Brookfield. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
About our bath re-enamelling in Brookfield
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Our technicians work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people get in touch are an old resurfacing that’s failing and several chips and rust patches.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Brookfield (PR2, PR1)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Brookfield
Brookfield is about 2 miles north-east of Preston, in Lancashire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Brookfield is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Brookfield to Manchester (28 miles away).
Our repair technicians cover all of the PR2 and PR1 postcode area. Streets in the area include Melba Road, Floyd Road and Derry Road. Brookfield is on the M6, so it’s easy for us to reach. We also cover the places around Brookfield: Ribbleton (1 mile south), Deepdale (1 mile south-west), Fishwick (1 mile south), Preston (2 miles south-west) and Walton-le-Dale (2 miles south). Within a short drive, we also cover Chorley (9 miles south), Lytham St Anne's (14 miles west), Bamber Bridge (4 miles south), Accrington (13 miles east), Leyland (6 miles south) and Clitheroe (13 miles north-east).
What’s near Brookfield
We visit homes around The Ascension Church & Community Centre, Moor Park and Moor Park High School. The closest station to Brookfield is Preston station, roughly 2.5 miles south-west. Further afield, we also cover the area around St George's Shopping Centre (2.2 miles south-west) and Preston Castle (2.8 miles south-west). Not far away are Brockholes.
- Local facilities include Tulketh (2.3 miles south-west)
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Do not leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Landlord and trade work in Brookfield
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Brookfield, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Brookfield. The price comes down to:
- Unusual colours or finishes
- Where the damage is and how we get to it
- The material
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Signs you need bath re-enamelling in Brookfield
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Wear marks under the taps
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
Before you book anyone
- How the room is protected while they work
- How long it needs to cure
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Places near Brookfield
Also in Brookfield
Brookfield: your questions answered
What areas do you cover?
All of Lancashire, and the rest of the UK. There is no extra charge for travel.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Are there extra charges for Brookfield?
No. Our quotes include travel, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
