Telford and Wrekin · England
Bath Re-enamelling for Coalport homes
Bath re-enamelling for Coalport, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Coalport without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Our repair technicians work on acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are brown or grey marks that don’t clean off and wear marks under the taps.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Coalport (TF8, TF7, TF12)
- Region
- Telford and Wrekin
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Every repair guaranteed for a year
- Nothing taken out or refitted
See our pricing and guide to resurfacing and replacement costs.
What we’re called out for in Coalport
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
Comparing quotes
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- What aftercare is recommended
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- How many areas need work
- The material
- The colour and finish to match
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- The postcode, so we can plan the visit
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Towns and villages near Coalport
Other services in Coalport
Landlords, agents and businesses in Coalport
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
Our work in Coalport
Coalport is about 1 mile south of Madeley, in Telford and Wrekin. Jobs in Coalport are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Coalport is one of 79 towns and villages in Telford and Wrekin where we work. You can also see our page for Birmingham, about 25 miles away.
Postcode districts we cover here: TF8, TF7 and TF12. Local streets include High Street, Riverside Avenue and Coalport High Street, all of which we cover. Other places close to Coalport include Preens Eddy (1 mile west), The Tuckies (1 mile west), Sutton Hill (1 mile north), Jackfield (1 mile north-west) and Madeley (1 mile north). We also work in nearby towns such as Telford (5 miles north), Wellington (6 miles north-west), Dawley (3 miles north), Oakengates (5 miles north), Newport (11 miles north) and The Rock (4 miles north).
Landmarks near Coalport
Around Coalport, we work in homes near Church of St Mary the Virgin, Abraham Darby Academy and The Brewery Inn, among other places. For rail, the closest station is Telford Central station, roughly 4.4 miles north. Nearby you will also find Ryton Castle Hillfield (3.8 miles east) and Museum of The Post Office In The Community (0.9 miles north).
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes a full day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
How to get a price
Most clients in Coalport get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Questions from Coalport
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you come to Coalport?
Yes. We work across the UK and come to Coalport and the rest of Telford and Wrekin. Send pictures and we will quote, or call 0345 017 0787.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
