Flintshire · England
Bath Re-enamelling for Brynffordd homes
Full bath re-enamelling and resurfacing in Brynffordd, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
How we handle bath re-enamelling in Brynffordd
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you are dealing with a dull, rough surface that won’t come clean and thin, worn enamel in places, we can help, on basins & shower trays, acrylic baths and pressed steel baths alike.
Every repair is covered by a one-year guarantee.
- Location
- Brynffordd (CH8)
- Area hub
- Flintshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day, including clearing up.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Keep pets and children out of the room while we work
Getting a price
If you’re in Brynffordd and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Your questions about bath re-enamelling in Brynffordd
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What happens next?
We come back with a fixed quote. There is no obligation to book.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What information do you need?
Use the quote form or ring 0345 017 0787.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Where we work around Brynffordd
Brynffordd (also: Brynford) is about 4 miles west of Flint, in Flintshire. Our repair technicians come to customers in Brynffordd and the surrounding area, so you don’t need to take anything anywhere. Brynffordd is one of 139 towns and villages in Flintshire we cover. Our jobs stretch from Brynffordd to Liverpool (16 miles away).
All of CH8 is covered, from the main roads to the quietest streets. Nearby, we also work in Calcoed (1 mile north-west), Milwr (1 mile east), Holywell (1 mile north), Carmel (1 mile north) and Holway (1 mile north). Larger places within reach include Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (9 miles south-east), Flint (4 miles east), Saltney (14 miles south-east) and Mold (7 miles south-east).
Local landmarks in Brynffordd
Locally, our jobs take us to homes close to Brynford C.P. School, Llyn y Mawn pub and St Michael's Church and the streets around them. For rail, the closest station is Flint station, roughly 4.2 miles east. Other landmarks nearby include St Winefride's Well Museum (1.4 miles north) and Holywell Castle Mound (1.4 miles north). Open spaces near Brynffordd include Llyn Helyg and Pen y Ball Top.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Brynffordd
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to care for the repair
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Also in Brynffordd
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
What you get with us
- A fixed quote before you book
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
See our prices page and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Brynffordd
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The most common problems we are called about are:
- A coloured bath you want in white
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Before booking anyone
- Whether a trained technician does the job
- What happens if they find more damage
- What preparation is included
- Aftercare advice
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
Materials we work on in Brynffordd
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
