Greater London · England
Bath re-enamelling & resurfacing in Clay Hill, Greater London
Full bath re-enamelling and resurfacing at your home in Clay Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Bath re-enamelling at your home in Clay Hill
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair basins & shower trays, Victorian roll-tops and acrylic baths, and the jobs we see most are brown or grey marks that don’t clean off and an old resurfacing that’s failing.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Clay Hill (EN2, EN1)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Nearby places to Clay Hill
Also in Clay Hill
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
How it works
Arrival times are agreed in advance. On site, it takes most of the day in most cases. We leave the room clean.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Let us know about parking or access
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Advice
Clay Hill and nearby
Clay Hill is about 1 mile north of Enfield, in Greater London. Customers in Clay Hill get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 764 towns and villages across Greater London, from the larger towns to small villages. Our jobs stretch from Clay Hill to London (12 miles away).
Our repair technicians cover all of the EN2 and EN1 postcode area and the streets around it. Whether you live on Cedar Road, Flash Lane and Acacia Road or a nearby road, we can come to you. Neighbouring places we cover include Gordon Hill (1 mile south), Forty Hill (1 mile south-east), Crews Hill (1 mile north-west), Bulls Cross (1 mile east) and Enfield Chase (1 mile south-west). Larger places within reach include London (12 miles south), City of Westminster (11 miles south), Marylebone (11 miles south), Kensington (13 miles south-west), St Pancras (10 miles south) and Shoreditch (10 miles south).
What’s near Clay Hill
We visit homes around St John's CofE Primary School, Russet House School and Enfield Town Park, among other places. Other local landmarks include Chace Community School (0.9 miles south-east), Rose and Crown pub (under half a mile south) and Church of St John the Baptist (0.5 miles west). Clay Hill’s nearest station is Gordon Hill station, about 0.8 miles south-west of the centre. Nearby you’ll also find Municipal Borough of Enfield (less than half a mile south-west) and St Michaels Hospital (0.7 miles south). Green spaces nearby include Fir and Pond Woods and Pole Hill.
Common problems we fix in Clay Hill
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Before booking anyone
- How your room will be protected
- What prep work is covered
- Whether there are any call-out or travel charges
- How the colour is matched
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Clay Hill questions
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Fixed prices from your photos
- Work done at your home or business
- Colour mixed on the day to match
- Honest advice, even when it means no job
Take a look at our pricing and resurfacing vs replacement cost guide.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
