Greater London · England
Bath Re-enamelling for Forty Hill homes
Bath re-enamelling for Forty Hill, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Bath re-enamelling in Forty Hill, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. Common call-outs are for brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough, across acrylic baths, cast iron baths and pressed steel baths.
All our work comes with our one-year guarantee.
- Where
- Forty Hill (EN1, EN2)
- County
- Greater London
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There’s no charge for travel to Forty Hill. The price comes down to:
- The size and number of damaged areas
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- A picture taken from further back
- The material, if you know it
- Daylight if possible, and no flash reflection
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Landlords, agents and businesses in Forty Hill
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Signs you need bath re-enamelling in Forty Hill
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Most people contact us after spotting one of these:
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether a trained technician does the job
- What preparation is included
- What happens if they find more damage
- If travel is included in the price
Questions from Forty Hill
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do you cover Forty Hill?
Yes. We work across the UK and come to Forty Hill. Send photos and we will quote, or call 0345 017 0787.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Get a quote
To get a price, send two or three photos using our quote form or ring us. We will say immediately if a repair is the right fix.
Related advice
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Forty Hill customers choose us
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Most jobs done in one visit
See our prices page and bath cost comparison.
Forty Hill and the surrounding area
Forty Hill is about 1 mile north-east of Enfield, in Greater London. From the centre of Forty Hill to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Forty Hill is one of 764 towns and villages in Greater London we cover. We work right across the region, from Forty Hill to London (about 12 miles away).
Our technicians cover all of the EN1 and EN2 postcode area. You’ll find streets such as Goat Lane, Acacia Road and Willow Road, and we cover them all. We also cover the places around Forty Hill: Gordon Hill (1 mile west), Clay Hill (1 mile north-west), Bulls Cross (1 mile north), Enfield (1 mile south-west) and Bullsmoor (1 mile north-east). We also work in nearby towns such as London (12 miles south), City of Westminster (11 miles south), Marylebone (11 miles south), Kensington (13 miles south-west), St Pancras (10 miles south) and Shoreditch (10 miles south).
Near you in Forty Hill
In Forty Hill, that means homes near Hop Poles pub, Worcesters Primary School and Russet House School, among other places. Nearby too are Enfield Town Park (1.4 miles south-west), Chace Community School (0.5 miles south-west) and Jesus Church (less than half a mile north-east). Forty Hill’s nearest station is Turkey Street station, about 1 mile north-east of the centre. Well-known places in the area include Municipal Borough of Enfield (1 mile west) and St Michaels Hospital (0.8 miles west). For a walk, there’s Fir and Pond Woods and Pole Hill.
Nearby places to Forty Hill
Also in Forty Hill
About our accreditations · Every repair comes with a one-year guarantee.
