Shropshire · England
Bath Re-enamelling in Cockshutt
Our technicians come to Cockshutt for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About our bath re-enamelling in Cockshutt
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for thin, worn enamel in places and a bath in a colour that no longer suits, across Victorian roll-tops, cast iron baths and basins & shower trays.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Cockshutt (SY12)
- Region
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
Get a quote
Most customers in Cockshutt get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Cockshutt. What changes the price is:
- Unusual colours or finishes
- The material
- Any earlier repairs that need removing first
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A close-up of the damage, in focus
- One picture of the whole bath
For a price in Cockshutt, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Our work in Cockshutt
Cockshutt is about 9 miles east of Oswestry, in Shropshire. Wherever you are in the SY12 postcode area, we carry out the work at your property. Cockshutt is one of 433 places in Shropshire we cover. Our jobs stretch from Cockshutt to Liverpool (38 miles away).
Jobs in SY12 are booked in the same way as anywhere else. That includes homes on Crosemere Road, The Briars and Crosemere Crescent and the roads around them. We also travel to Loppington (2 miles east), Burlton (2 miles south-east), Lyneal (3 miles north), Weston Lullingfields (3 miles south) and Balmer Heath (3 miles north). Further out, we also cover Shrewsbury (11 miles south), Oswestry (9 miles west), Market Drayton (15 miles east), Coleham (11 miles south), Kingsland (11 miles south) and Whitchurch (10 miles north-east).
Near you in Cockshutt
Around Cockshutt, we work in homes near Church of St Simon and St Jude, Cockshutt CofE Primary School and Nursery and The Woodcock Inn. Nearby you will also find Ellesmere Castle (3.9 miles north-west). For a walk, there’s Crose Mere.
Do you need bath re-enamelling in Cockshutt?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- Stains that won’t shift
- Several chips and rust patches
- A roll-top that is seen better days
Before booking anyone
- What happens if they find more damage
- A fixed quote, and whether VAT is included
- What preparation is included
- How the colour is matched
Common questions in Cockshutt
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What happens next?
You will get a fixed quote back, plus dates. You are under no obligation.
Landlord and trade work in Cockshutt
We work for landlords, letting agents and housing providers in Cockshutt as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Do not leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Also near Cockshutt
Also in Cockshutt
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Cockshutt
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
