Shropshire · England
Bath re-enamelling & resurfacing in Eyton, Shropshire
We travel to Eyton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
Bath re-enamelling in Eyton without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We are often asked to fix worn patches where water runs and sits and a bath in a colour that no longer suits, across pressed steel baths, Victorian roll-tops and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Area
- Eyton (SY4)
- County
- Shropshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Covering Eyton
Eyton is about 7 miles north-west of Shrewsbury, in Shropshire. Whether you’re in the middle of Eyton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 433 places across Shropshire. Our nearest city page is Liverpool, about 42 miles away.
Our technicians cover all of SY4. If you’re just outside Eyton, we cover Baschurch (1 mile south-west), Grafton (2 miles south), Little Ness (3 miles south-west), Ruyton-XI-Towns (3 miles west) and Forton Heath (3 miles south). We also work in nearby towns such as Shrewsbury (7 miles south-east), Oswestry (10 miles north-west), Coleham (8 miles south-east), Kingsland (7 miles south-east), Whitchurch (13 miles north-east) and Belle Vue (8 miles south-east).
Landmarks near Eyton
In Eyton, that means homes near The Corbet School, Church of All Saints and The Corbet School. For rail, the closest station is Yorton station, about 4.2 miles east of the centre. Well-known places in the area include Myddle Castle (2 miles east). Open spaces near Eyton include Crose Mere.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Signs you need bath re-enamelling in Eyton
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
It’s worth getting a quote if you see:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
- A roll-top that is seen better days
Comparing quotes
- Is the price fixed, and does it include VAT?
- How to care for the finish
- How changes to the job are handled
- Who will actually do the work
Other services in Eyton
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- The material
- How easy the damage is to reach
- The colour and finish to match
- How much damage there is
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Any details about the material
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, including clearing up.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Prices start from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Normally one visit, start to finish
- Fixed prices from your pictures
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list and guide to resurfacing and replacement costs.
Common questions in Eyton
Do you work in Eyton?
Yes. We work across the UK and travel to Eyton. Send us photos for a fixed quote, or call 0345 017 0787.
Do you cover the entire of Shropshire?
We work UK-wide, so Eyton is covered. Prices don’t change with location.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do the materials smell?
There may be a mild smell during the work.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
About our accreditations · Every repair comes with a one-year guarantee.
