Conwy · Wales
Bath re-enamelling & resurfacing in Caerhun, Conwy
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Caerhun. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Bath re-enamelling at your home in Caerhun
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for an old resurfacing that’s failing and enamel that’s lost its shine and feels rough, across pressed steel baths, acrylic baths and basins & shower trays.
Big or small, you get the same one-year guarantee in Caerhun and across Conwy.
- Where
- Caerhun (LL32, LL28)
- County
- Conwy
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Caerhun?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Caerhun contact us are:
- Stains that won’t shift
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
What your quote should include
- What aftercare is recommended
- Whether the colour is mixed to match
- Whether the price covers travel
- What the guarantee covers, and for how long
Places near Caerhun
Also in Caerhun
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a repair cannot fix
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Questions from Caerhun
Do you cover Caerhun?
Yes, we do. We send a technician to Caerhun for every job, with no extra charge for travel.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you quote from photos?
Nearly always. If photos do not show enough, we will ask for another angle.
How long will the bath be out of use?
One day for most baths, ready the day after. We give you timings with the quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It typically takes a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Aftercare tips
Looking after the surface is easy:
- Don’t leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Caerhun. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Caerhun
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
See our pricing and bath cost comparison.
Landlord and trade work in Caerhun
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Our work in Caerhun
Caerhun is about 6 miles south-west of Colwyn Bay, in Conwy. We travel to customers in Caerhun and the surrounding area, so you do not need to take anything anywhere. Caerhun is one of 75 towns and villages in Conwy where we work. Our jobs stretch from Caerhun to Liverpool (about 40 miles away).
Our repair technicians cover all of LL32 and LL28 and the streets around it. Streets in the area include Llanrwst Road and Maes Rhun, and we cover them all. Other places close to Caerhun include Ty'n-y-groes (1 mile north), Tal-y-bont (1 mile south-west), Tal-y-cafn (1 mile north-east), Rowen (1 mile north-west) and Henryd (3 miles north). Within a short drive, we also cover Bae Colwyn (7 miles north-east), Llandudno (7 miles north), Old Colwyn (7 miles north-east), Colwyn Bay (8 miles north-east), Abergele (11 miles north-east) and Colwyn Bay (6 miles north-east).
Landmarks near Caerhun
Typical jobs here are in homes near St Mary's Church, Red Lion pub and Ysgol Gynradd Tal-Y-Bont, among other places. The closest station to Caerhun is Tal-Y-Cafn station, about 1.1 miles north-east of the centre. Well-known places in the area include Pen-y-Castell (2.7 miles south-east) and Conwy Hospital (4.7 miles north). The countryside around Caerhun includes Conwy RSPB reserve and Clytiau-poethion.
About our accreditations · Every repair comes with a one-year guarantee.
