Conwy · Wales
Bath re-enamelling & resurfacing in Tal-y-bont, Conwy
Full bath re-enamelling and resurfacing for homes and businesses in Tal-y-bont and across Conwy. Free, fixed quotes from your photos.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- Doing more than one item at once
- What kind of damage it is
- The colour and finish to match
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Natural light rather than flash
- Something in shot to show the size
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Bath re-enamelling at your home in Tal-y-bont
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We are frequently asked to fix thin, worn enamel in places and a bath in a colour that no longer suits, in acrylic baths, cast iron baths and pressed steel baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Tal-y-bont (LL32)
- County
- Conwy
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Honest limits
In fairness, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
FAQs for Tal-y-bont
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What areas do you cover?
Everywhere in the UK, Tal-y-bont included. Travel is included in the price.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you do the outside of a roll-top?
Yes. Inside and out.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Repairing versus replacing in Tal-y-bont
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
See our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Tal-y-bont
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- A coloured bath you want in white
Before booking anyone
- Who will actually do the work
- How the colour is matched
- How the room is protected while they work
- How long it needs to cure
Also near Tal-y-bont
Also in Tal-y-bont
Our work in Tal-y-bont
Tal-y-bont is about 8 miles south-west of Colwyn Bay, in Conwy. From the centre of Tal-y-bont to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 75 towns and villages in Conwy. Our nearest city page is Liverpool, about 41 miles away.
Every address in LL32 is covered, from the main roads to the quietest streets. Whether you live on Conway Road and Hendy or anywhere nearby, we can come to you. If you’re just outside Tal-y-bont, we cover Caerhun (1 mile north-east), Ty'n-y-groes (2 miles north), Rowen (2 miles north), Tal-y-cafn (2 miles north-east) and Henryd (4 miles north). We also work in nearby towns such as Bae Colwyn (8 miles north-east), Llandudno (8 miles north), Old Colwyn (9 miles north-east), Colwyn Bay (9 miles north-east), Abergele (12 miles north-east) and Colwyn Bay (8 miles north-east).
What’s near Tal-y-bont
Typical jobs here are in homes near Ysgol Gynradd Tal-Y-Bont, St Peter's Church and Y Bedol Inn and the streets around them. The nearest railway station is Dolgarrog station, about 1.5 miles south-east of the centre. Nearby you’ll also find Conwy Hospital (5.8 miles north) and Pen-y-Castell (2.1 miles south-east). Open spaces near Tal-y-bont include Llyn Syberi and Pen y Gaer.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
