Conwy · Wales
Bath Re-enamelling for Rowen homes
We travel to Rowen for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. We charge the same wherever you are, with no extra for Rowen. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Same prices wherever you are
- No need to remove anything
- A fixed quote before you book
- We leave the room as we found it
Take a look at our full price list and resurfacing vs replacement cost guide.
About our bath re-enamelling in Rowen
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are lots of chips and rust spots and a coloured bath you want in white.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Rowen (LL32)
- Region
- Conwy
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Rowen
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can you quote from photos?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
How to look after the repair
Nothing complicated is needed:
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Our work in Rowen
Rowen is about 6 miles south of Llandudno, in Conwy. From the centre of Rowen to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 75 places in Conwy, from the larger towns to small villages. Our nearest city page is Liverpool, about 40 miles away.
We work across the LL32 postcode area and the streets around it. If you are just outside Rowen, we cover Ty'n-y-groes (1 mile east), Caerhun (1 mile south-east), Tal-y-cafn (2 miles east), Tal-y-bont (2 miles south) and Henryd (2 miles north-east). Larger places within reach include Bae Colwyn (7 miles north-east), Llandudno (6 miles north), Old Colwyn (8 miles north-east), Colwyn Bay (8 miles north-east), Abergele (12 miles east) and Colwyn Bay (7 miles north-east).
What’s near Rowen
Locally, our jobs take us to homes close to Llangelynin New Church and Ty Gwyn Hotel, among other places. The nearest railway station is Tal-Y-Cafn station, roughly 1.7 miles east. Other landmarks nearby include Conwy Castle (3.7 miles north) and Penmaenmawr Museum (3.6 miles north-west). Not far away are Llyn Syberi and Bodlondeb Woods.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Doing more than one item at once
- The colour and finish to match
- Previous DIY repairs that have to come out
- The material
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
Email us a photo of the damage and a wider shot of the entire item, and tell us you are in Rowen, and we will reply with a fixed quote.
Landlord and trade work in Rowen
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Also in Rowen
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Common problems we fix in Rowen
Often the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
The most common problems we are called about are:
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What your quote should include
- Whether they match the colour on site
- How soon you can use it again
- What preparation is included
- A fixed price, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
