Conwy · Wales
Bath Re-enamelling in Tal-y-cafn
Our technicians come to Tal-y-cafn for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Wear marks under the taps
Bath re-enamelling at your home in Tal-y-cafn
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s a bath in a colour that no longer suits and staining under the taps and around the waste, we can generally put it right, on Victorian roll-tops, acrylic baths and pressed steel baths alike.
Big or small, you get the same one-year guarantee.
- Where
- Tal-y-cafn (LL28)
- Area hub
- Conwy
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Tal-y-cafn
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A coloured bath you want in white
- A dull, rough surface that will not come clean
What your quote should include
- How your room will be protected
- What the guarantee covers, and for how long
- When it can be used again
- Is the price fixed, and does it include VAT?
Nearby places to Tal-y-cafn
Also in Tal-y-cafn
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Access to the area
- The material and finish
- The type of damage
- How hard the colour is to match
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- What it’s made of, if you know
- One sharp close-up of the damage
Email us photos of the damage and a wider shot of the entire item, with your LL28 postcode, and we will reply with a fixed price.
FAQs for Tal-y-cafn
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Which areas do you work in?
Across the UK, and that includes Tal-y-cafn. Prices do not change with location.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Tal-y-cafn?
Yes. We cover the entire UK and come to Tal-y-cafn and the rest of Conwy. Send us photos for a fixed quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Rooms protected and left tidy
- Most jobs done in one visit
- No extra charge for your area
- Work done at your home or business
Read our full price list and bath cost comparison.
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. Allow a full day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Read more
Tal-y-cafn and the surrounding area
Tal-y-cafn is about 6 miles south-west of Bae Colwyn, in Conwy. Our technicians come to homes and businesses in Tal-y-cafn and the surrounding area, so nothing has to leave your home. We work in all 75 towns and villages in Conwy, from the larger towns to small villages. Our jobs stretch from Tal-y-cafn to Liverpool (about 39 miles away).
All of LL28 is within our area. Other places close to Tal-y-cafn include Ty'n-y-groes (1 mile west), Caerhun (1 mile south-west), Rowen (2 miles west), Henryd (2 miles north-west) and Tal-y-bont (2 miles south-west). Larger places within reach include Bae Colwyn (6 miles north-east), Llandudno (6 miles north), Old Colwyn (6 miles north-east), Colwyn Bay (6 miles north-east), Abergele (10 miles east) and Colwyn Bay (5 miles north-east).
What’s near Tal-y-cafn
We visit homes around Red Lion pub and St Mary's Church. Tal-y-cafn has its own railway station: Tal-Y-Cafn station. A little further out are Conwy Hospital (4 miles north) and Pen-y-Castell (3.3 miles south). For a walk, there’s Llyn Syberi and Furnace Wood.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we can’t put right
It helps to know what we can’t do:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
