Wiltshire · England
Bath re-enamelling & resurfacing in Charlton All Saints, Wiltshire
We travel to Charlton All Saints for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A coating lifting around the plughole
Bath re-enamelling in Charlton All Saints, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with wear marks under the taps and a dull, rough surface that won’t come clean, we can normally put it right, on pressed steel baths, Victorian roll-tops and basins & shower trays alike.
A one-year guarantee comes as standard.
- Location
- Charlton All Saints (SP5)
- County
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Charlton All Saints?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why us?
- We leave the room as we found it
- Colour mixed on the day to match
- A fixed quote before booking
- Every repair guaranteed for a year
Take a look at our full price list and guide to resurfacing and replacement costs.
Questions from Charlton All Saints
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How do I get a price for bath re-enamelling in Charlton All Saints?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SP5 postcode.
Do you cover the whole of Wiltshire?
The entire UK, including all of Wiltshire. Just include your postcode and we will offer you dates.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
What happens next?
We review the pictures and send a fixed quote with dates.
Do you cover Charlton All Saints?
We do. Technicians travel to Charlton All Saints from across the region, and the price is the same as everywhere else.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Charlton All Saints
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
What affects the price in Charlton All Saints
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- The type of damage
- The material and finish
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- A close-up of the damage, in focus
If you’re in Charlton All Saints and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also in Charlton All Saints
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
When to call us in Charlton All Saints
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
Comparing quotes
- What aftercare is recommended
- What protection goes down before work starts
- When it can be used again
- What happens if they find more damage
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
Ask for a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Charlton All Saints, and we’ll reply with a fixed price.
Related advice
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Covering Charlton All Saints
Charlton All Saints is about 5 miles south-east of Salisbury, in Wiltshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Charlton All Saints is one of 425 places in Wiltshire we cover. Our jobs stretch from Charlton All Saints to London (about 79 miles away).
All of SP5 is covered, from the main roads to the quietest streets. Local streets include Chapel Lane and Lower Road. If you’re just outside Charlton All Saints, we cover Nunton (2 miles north-west), Whaddon (2 miles north-east), Alderbury (2 miles north-east), Odstock (2 miles north-west) and Shute End (2 miles north). We also work in nearby towns such as Salisbury (5 miles north-west), Amesbury (10 miles north), Bugmore (4 miles north-west), Milford (4 miles north-west), Old Sarum (6 miles north) and Harnham (4 miles north-west).
Around Charlton All Saints
Locally, our jobs take us to homes close to Church of Charlton All Saints and The Trafalgar School at Downton, among other places. Charlton All Saints’s nearest station is Salisbury station, roughly 4.5 miles north-west. Well-known places in the area include Downton Moot Close (1.8 miles south) and Salisbury District Hospital (2.6 miles north-west). Green spaces nearby include Harnham Hill.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- A quick wipe after use keeps limescale away
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
