Staffordshire · England
Bath re-enamelling & resurfacing in Coton End, Staffordshire
Bath re-enamelling in Coton End without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
About our bath re-enamelling in Coton End
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, in basins & shower trays, acrylic baths and pressed steel baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Coton End (ST20)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
Also near Coton End
More services for Coton End
What we are called out for in Coton End
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Customers normally contact us about:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Before booking anyone
- How long it needs to cure
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- Whether the price covers travel
Coton End: your questions answered
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How much does bath re-enamelling cost in Coton End?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Landlord and trade work in Coton End
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
If you manage property in Coton End, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Covering Coton End
Coton End is about 4 miles east of Newport, in Staffordshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Coton End is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Coton End to Birmingham (26 miles away).
Every address in ST20 is covered. If you are just outside Coton End, we cover Coton (1 mile north), Beffcote (1 mile south-west), Gnosall Heath (1 mile north-east), Bromstead Heath (1 mile south-west) and Gnosall (2 miles north-east). Within a short drive, we also cover Stafford (7 miles east), Cannock (12 miles south-east), Rugeley (14 miles east), Stone (10 miles north-east), Hednesford (12 miles east) and Penkridge (8 miles south-east).
Around Coton End
Around Coton End, we work in homes near The Boat Inn and Gnosall Methodist Church, among other places. Other landmarks nearby include Aqualate Castle (2.8 miles west). The countryside around Coton End includes Loynton Moss and Aqualate Mere.
Repair or replace in Coton End?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Everything repaired in place
- Most jobs done in one visit
- Dust sheets down, tidy finish
- A fixed quote before booking
Read our full price list or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Coton End. What changes the price is:
- How many areas need work
- Whether old repairs or coatings need taking off
- The type of damage
- How easy the damage is to reach
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Any details about the material
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
