Pembrokeshire · Wales
Bath Re-enamelling in Cilgeti
Damaged bath in Cilgeti? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our bath re-enamelling in Cilgeti
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s thin, worn enamel in places and an outdated colour you’d like to change, we can typically put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Cilgeti (SA68)
- Region
- Pembrokeshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Cilgeti and the surrounding area
Cilgeti (Welsh: Kilgetty) is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Our technicians come to customers in Cilgeti, so there is no workshop to go to. We work in all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
Postcode districts we cover here: SA68. From Station Road, Heritage Gardens and St Mary's Place or anywhere nearby, we can come to you. Nearby, we also work in Kingsmoor (1 mile south), Begeli (1 mile west), Hill (1 mile south-west), Pentlepoir (1 mile south-west) and Broom (1 mile north-west). Further out, we also cover Haverfordwest (12 miles north-west), Milford Haven (14 miles west), Pembroke (9 miles south-west), Pembroke Dock (10 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (4 miles south).
Near you in Cilgeti
In Cilgeti, that means homes near Stepaside C.P. School, Church Of St. Mary and The White Horse pub. There is a railway station in Cilgeti itself: Kilgetty station. Other landmarks nearby include Tenby Cottage Hospital (3.8 miles south) and Castle Ring (0.5 miles west). For a walk, there is Pentlepoir Hill.
Your questions about bath re-enamelling in Cilgeti
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you cover the entire of Pembrokeshire?
All of Pembrokeshire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Common problems we fix in Cilgeti
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Customers generally contact us about:
- A coloured bath you want in white
- An old resurfacing that’s failing
- Thin, worn enamel in places
- Chips and rust in more than one place
What to look for in a quote
- If travel is included in the price
- What happens if they find more damage
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
What affects the price in Cilgeti
Prices start from £350. Every quote is fixed and free. What we take into account:
- The material and finish
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can typically get a fixed price without us visiting. To make it quick:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
Ask for a price
Upload a picture of the damage and one of the whole item, with your SA68 postcode, and we’ll reply with a fixed quote.
Read more
Places near Cilgeti
Also in Cilgeti
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
- Everything repaired in place
See our full price list or resurfacing vs replacement cost guide.
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
