Pembrokeshire · Wales
Bath Re-enamelling for Pentlepoir homes
Bath re-enamelling across Pentlepoir and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- A bath in a colour that no longer suits
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our bath re-enamelling in Pentlepoir
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s worn patches where water runs and sits and a peeling or bubbling previous coating, we can help, on cast iron baths, basins & shower trays and pressed steel baths alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Pentlepoir (SA68, SA69)
- Region
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Simple care helps the repair last. Our advice:
- Keep suction mats out of the bath
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What affects the price in Pentlepoir
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- The material
- How many areas need work
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed price
You can take the photos on your phone. Just make sure we can see:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- Any details about the material
- Natural light rather than flash
If you are in Pentlepoir and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Our work in Pentlepoir
Pentlepoir is about 12 miles south-east of Haverfordwest, in Pembrokeshire. We travel to homes and businesses in Pentlepoir and nearby villages, so there is no workshop to go to. We work in 223 places in Pembrokeshire, from the larger towns to small villages.
Our technicians cover all of the SA68 and SA69 postcode area and the streets around it. Whether you live on Green Park, Hawthorn Close and Millfield Close or anywhere nearby, we can come to you. We also cover the places around Pentlepoir: Wooden (1 mile south), Hill (1 mile north-east), The Valley (1 mile south-east), Kingsmoor (1 mile north-east) and Begeli (1 mile north). Within a short drive, we also cover Haverfordwest (12 miles north-west), Milford Haven (13 miles west), Pembroke (9 miles west), Pembroke Dock (9 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (3 miles south).
What’s near Pentlepoir
We visit homes around Church Of St. Mary, Stepaside C.P. School and Woodridge Inn Hotel and the streets around them. There’s a railway station in Pentlepoir itself: Saundersfoot station. A little further out are Tudor Merchant's House Museum (3.6 miles south) and Castle Ring (0.8 miles north). The countryside around Pentlepoir includes Pentlepoir Hill.
Signs you need bath re-enamelling in Pentlepoir
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
The most common problems we are called about are:
- A roll-top that is seen better days
- A coating lifting around the plughole
- Chips and rust in more than one place
- Staining under the taps and around the waste
What your quote should include
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- What happens if they find more damage
Repairing versus replacing in Pentlepoir
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Work done at your home or business
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
See our prices page and bath cost comparison.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
FAQs for Pentlepoir
How long does re-enamelling take?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Towns and villages near Pentlepoir
More services for Pentlepoir
What we cannot put right
In fairness, there are a few things a repair will not fix:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
