Pembrokeshire · Wales
Bath Re-enamelling for Kingsmoor homes
Our repair technicians come to Kingsmoor for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
About our bath re-enamelling in Kingsmoor
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the next day. If you are dealing with lots of chips and rust spots and a bath in a colour that no longer suits, we can normally put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Kingsmoor (SA68)
- Area hub
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Kingsmoor. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many areas need work
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
If you’re in Kingsmoor and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Common problems we fix in Kingsmoor
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
These are the problems we are asked about most:
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
- Wear marks under the taps
What your quote should include
- How soon you can use it again
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
- Whether the price covers travel
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Kingsmoor. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Generally one visit, start to finish
- A fixed quote before you book
Read our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Kingsmoor
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About Kingsmoor
Kingsmoor is about 12 miles south-east of Haverfordwest, in Pembrokeshire. Wherever you are in the SA68 postcode area, we carry out the work at your property. Kingsmoor is one of 223 places in Pembrokeshire we cover.
Postcode districts we cover here: SA68. You’ll find streets such as Kingsmoor Close, Kingsmoor Road and Ivy Chimney Lane. We also cover the places around Kingsmoor: Hill (1 mile south-west), Cilgeti (1 mile north), Begeli (1 mile north-west), Pentlepoir (1 mile south-west) and The Valley (1 mile south). We also work in nearby towns such as Haverfordwest (12 miles north-west), Milford Haven (14 miles west), Pembroke (9 miles south-west), Pembroke Dock (10 miles west), The Marsh (12 miles north-west) and Dinbych-y-Pysgod (4 miles south).
Landmarks near Kingsmoor
Typical jobs here are in homes near Stepaside C.P. School, The White Horse pub and Church Of St. Mary and the streets around them. There is a railway station in Kingsmoor itself: Saundersfoot station. Other landmarks nearby include Tenby Cottage Hospital (3.4 miles south) and Tenby Museum and Art Gallery (3.9 miles south). The countryside around Kingsmoor includes Pentlepoir Hill.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Common questions in Kingsmoor
How much does bath re-enamelling cost in Kingsmoor?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you’ll get one combined price.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Also near Kingsmoor
More services for Kingsmoor
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
